Pages:: 3-22

Keywords: nickel-based superalloys, single crystals, partitioning coefficients, segregation of atoms at dislocation cores, phase stability, rhenium, ruthenium

Reference List

1. Inozemtsev A.A., Koryakovtsev A.S., Lesnikov V.P., Kuznetsov V.P. The role of materials and protective coatings in ensuring the reliability and efficiency of gas turbine engines. Proceedings of the Int. sci.-tech. conf. “Scientific ideas of S.T. Kishkin and modern materials science”. Moscow: VIAM, 2006, pp. 84–87.
2. Reed R.C. The Superalloys: Fundamentals and Applications. Cambridge: Cambridge University Press, 2006, 372 p.
3. Ospennikova O.G. Tendencies of development of heat-resistant nickel alloys of low density with polycrystalline and single-crystal structures (review). Aviacionnye materialy i tehnologii, 2016, no. 1 (40), pp. 3–19. DOI: 10.18577/2071-9140-2016-0-1-3-19.
4. Pollock T.M. Alloy design for aircraft engines. Nature Materials, 2016, vol. 15, pp. 809–815.
5. Petrushin N.V., Ospennikova O.G., Svetlov I.L. Single-crystal Ni-based superalloys for turbine blades of advanced gas turbine engines. Aviacionnye materialy i tehnologii, 2017, no. S, pp. 72−103. DOI: 10.18577/2071-9140-2017-0-S-72-103.
6. Kablov E.N., Echin A.B., Bondarenko Yu.A. History of development of directional crys-tallization technology and equipment for casting blades of gas turbine engines. Trudy VIAM, 2020, no. 3 (87), paper no. 01. Available at: http://www.viam-works.ru (accessed: November 6, 2021). DOI: 10.18577/2307-6046-2020-0-3-3-12.
7. Bondarenko Yu.A. Trends in the development of high-temperature metal materials and technologies in the production of modern aircraft gas turbine engines. Aviacionnye materialy
   i tehnologii, 2019, no. 2 (55), pp. 3–11. DOI: 10.18577/2071-9140-2019-0-2-3-11.
8. Ospennikova O.G. Implementation results of the strategic directions on creation of new generation of heat-resisting cast and wrought alloys and steels for 2012–2016. Aviacionnye materialy
   i tehnologii, 2017, no. S, pp. 17–23. DOI: 10.18577/2071-9140-2017-0-S-17-23.
9. Harada H. Development of Superalloys for 1700 °C ultra-efficient gas turbines. Proceedings of the 9th Liége-Conference on Materials for Advanced Power Engineering. Liége: Schriften des Forschungszentrum Julich, 2010, pp. 604–614. URL: http://hdl.handle.net/2268/20701 (дата обращения: 05.03.2022).
10. Logunov A.V. Heat-resistant nickel alloys for blades and disks of gas turbines. Rybinsk: Gazoturbinnye tekhnologii, 2017, 854 р.
11. Honeycombe R. Plastic deformation of metals. Moscow: Mir, 1972, 408 p.
12. Hirt D.Zh., Lote I. Theory of dislocations. Moscow: Atomizdat, 1972, 600 p.
13. Huang M., Zhu J. An overview of rhenium effect in single-crystal superalloys. Rare Metals, 2016, vol. 35, is. 2, pp. 127–139. DOI: 10.1007/s12598-015-0597-z.
14. Lilensten L., Kürnsteiner P., Mianroodi J.R. et al. Segregation of solutes at dislocations: A new alloy design parameter for advanced superalloys. Superalloys 2020. Pennsylvania: Minerals, Metals & Materials Society, 2020, pp. 41–51. DOI: 10.1007/978-3-030-51834-9_4.
15. Epishin A.I., Link T., Nolze G. et al. Diffusion processes in multicomponent nickel base superalloy–nickel system. The Physics of Metals and Metallography, 2014, vol. 115, no. 1,
    pp. 21–29. DOI: 10.1134/S0031918X14010050.
16. Rettig R., Singer R.F. Influence of ruthenium on topologically close packed phase precipitation in sindle-crystal Ni-based superalloys: numerical experiments and validation. Superalloys 2012. Pennsylvania: Minerals, Metals & Materials Society, 2012, pp. 205–213.
17. Koizumi Y., Kobayashi T., Yokokawa T. et al. Development of next-generation Ni-base single crystal superalloys. Superalloys 2004. Pennsylvania: Minerals, Metals & Materials Society, 2004, pp. 35−43.
18. Kablov E.N., Tolorayya V.N., Ostroukhova G.A. Growth structure of single-crystal castings from nickel heat-resistant alloys. Foundry heat-resistant alloys. Effect of S.T. Kishkins. Moscow: Nauka, 2006, рр. 219–245.
19. Zhang J.X., Murakumo T., Harada H. Dependence of creep strength on the interfacial dislocations in a fourth generation SC superalloy TMS-138. Scripta Materialia. 2003, vol. 48, pp. 287–293. DOI: 10.1016/S1359-6462(02)00379-2.
20. Kablov E.N., Svetlov I.L., Petrushin N.V. Nickel heat-resistant alloys for casting blades with directional and single-crystal structure (part I). Materialovedenie, 1997, no. 4, pp. 32‒38.
21. Kablov E.N., Petrushin N.V., Morozova G.I., Svetlov I.L. Physical and chemical factors of heat resistance of nickel alloys containing rhenium. Aviatsionnye materialy i tekhnologii, 2004, no. 1, рр. 37–47.
22. Petrushin N.V., Svetlov I.L., Samoylov A.I., Morozova G.N. Physicochemical properties and creep strength of a single crystal of nickel-base superalloy containing rhenium and ruthenium. International Journal of Materials Research (formerly Z. Metallkd.), 2010, vol. 101, pp. 594–600. DOI: 10.3139/146.110313.
23. Lashko N.F., Zaslavskaya L.V., Kozlova M.N. et al. Physico-chemical phase analysis of steels and alloys. Moscow: Metallurgiya, 1978, 336 p.
24. Bronfin M.B., Drugova I.A. On the influence of alloying on the processes of sublimation and diffusion in the γʹ-phase of nickel alloys. Structural and heat-resistant materials for new technology. Moscow: Nauka, 1978, pp. 138–146.
25. Portnoy K.I., Bogdanov V.I., Fuchs D.L. Calculation of interaction and phase stability. Moscow: Metallurgiya, 1981, 248 p.
26. Motura A., Miller M.K., ReedR.C. Atom probe tomography analysis of possible rhenium clustering in nickel-based superalloys. Superalloys 2008. Pennsylvania: Minerals, Metals & Materials Society, 2008, pp. 891–900.
27. Blavette D., Cadel E., Bareige C. et al. Phase transformation and segregation to lattice defects in Ni-base superalloys. Microscopy and Microanalysis. Cambridge University Press, 2007, pp. 464–483.
28. Reed R.C., Yeh A.C., Tin S. et al. Identification of the partitioning characteristics of ruthenium in single crystal superalloys using atom probe tomography. Scripta Materialia, 2004, vol. 51, pp. 327‒333. DOI: 10.1016/j.scriptamat.2004.04.019.
29. Van Sluytman J.S., La Fontaine A., Cairney J.M., Pollock T.M. Elemental partitioning of platinum group metal containing Ni-base superalloys using microprobe analysis and atom probe tomography. Acta Materialia, 2010, vol. 58, pp. 1952–1962. DOI: 10.1016/j.actamat.2009.11.038.
30. Shu D., Tian S., Tian N. et al. Influence of Re/Ru on concentration distribution in the γ/γʹ phases of in nickel-base single crystal superalloys. Materials and Design, 2017, vol. 132, pp. 198‒207. DOI: 10.1016/j.matdes.2017.06.069.
31. Blavette D., Caron P., Khan T. An atom probe investigation of the role of rhenium additions in improving creep resistance of Ni-base superalloys. Scripta Metallurgica, 1986, vol. 20, no. 10, pp. 1395‒1400. DOI: 10.1016/0036-9748(86)90103-1.
32. Yu X.X., Wang C.Y., Zhang X.N. et al. Synergistic effect of rhenium and ruthenium in nickel-base superalloys. Journal of Alloys and Compounds, 2004, vol. 51, pp. 327‒331. DOI: 10.1016/j.jallcom.2013.07.201.
33. Bridgman P.W. Certain physical properties of single crystals of tungsten, antimony, bismuth, tellurium, cadmium, zinc, and tin. Proceedings of the American Academy of Arts and Sciences, 1925, vol. 60, pp. 305–383. DOI: 10.2307/25130058.
34. Kablov E.N., Petrushin N.V., Sidorov V.V., Demonis I.M. Development of single-crystal high-rhenium heat-resistant nickel alloys by computer design. Aviatsionnye materialy i tekhnologii, 2004, no. 1, pp. 22–36.
35. Kablov E.N., Svetlov I.L., Petrushin N.V. Nickel heat-resistant alloys alloyed with ruthenium. Casting heat-resistant alloys. Effect of S.T. Kishkin. Moscow: Nauka, 2006, pp. 172–184.
36. Zhou Y., Mao Z., Booth-Morrison C., Seidman D.N. Partitioning and site preference of rhenium and ruthenium in model in nickel-base superalloys: An atom-probe tomographic and first-principles study. Applied Physics Letters, 2008, vol. 93, art. 171905. DOI: 10.1063/1.2998654.
37. Petrushin N.V., Bronfin M.B., Chabina E.B., Dyachkova L.A. Phase transformations and structure of directionally crystallized Ni–Al–Re intermetallic alloys. Metally, 1994, no. 3, pp. 85–93.
38. Saunders N. Phase diagram calculation for Ni-base superalloys. Superalloys 1996. Pennsylvania: Minerals, Metals & Materials Society, 1996, pp. 101–110.
39. Tryon B., Pollock T. Experimental assessment of the Ru–Al–Ni ternary phase diagram at 1000 and 1100 °C. Materials Sciences and Engineering A, 2006, vol. 430, pp. 266‒276. DOI: 10.1016/j.msea.2006.05.088.
40. Wang Y.-J., Wang C.-J. The alloying mechanisms of Re, Ru in quaternary Ni-based superalloys γ/γʹ interface: A first principle calculation. Materials Science and Engineering A, 2008, vol. 490, pp. 242–249. DOI: 10.1016/j.msea.2008.01.023.
41. Ding Q., Li S., Chen L.-Q. et al. Re segregation at interfacial dislocation network in nickel-base superalloys. Acta Materialia, 2018, vol. 154, pp. 137‒146. DOI: 10.1016/j.actamat.2018.05.025.
42. Matuszewski K., Rettig R., Matysiak H. et al. Effect of ruthenium on the precipitation of topologically close packed phases in Ni-base superalloys of 3rd and 4th generation. Acta Materialia, 2015, vol. 95, pp. 274‒283. DOI: 10.1016/j.actamat.2015.05.033.
43. Matuszewski K., Rettig R., Singer R.F. The effect of Ru on precipitation of topologically close packed phases in Re-containing Ni base superalloys: Quantitative FIB-SEM investigation and 3D image modeling. MATEC Web of conferences, 2014, vol. 14, art. 09001. DOI: 10.1051/matecconf/20141409001.
44. Heckl A., Neumeir S., Cenanovic S. et al. Reasons for enhanced phase stability of Ru-containing nickel-base superalloys. Acta Materialia, 2011, vol. 59, pp. 6563‒6573. DOI: 10.1016/j.actamat.2011.07.002.
45. Morozova G.I., Timofeeva O.B., Petrushin N.V. Features of the structure and phase composition of a high-rhenium nickel heat-resistant alloy. Metallovedenie i termicheskaya obrabotka metallov, 2009, no. 2 (644), pp. 10–16.

46. Svetlov I.L., Petrushin N.V., Epishin A.I., Elyutin E.S. Sinergistic  influence of a rhenium and ruthenium on the long-term strength of single-crystal of nickel heat resistant alloys of III‒IV of generations. Physics of metals metallography. 2022, vol. 123, no. 8, рр. 888–894. 

Pages:: 23-35

Keywords: high-cycle fatigue, strength, alloy VT6 and Ti64, heat treatment, forgings

Reference List

1. Pavlova T.V., Kashapov O.S., Kalashnikov V.S., Naprienko S.A. Fatigue strength of forgings and stampings from VT6 alloy for aircraft parts. Titan, 2019, no. 1, pp. 45–54.
2. Kablov E.N. The strategic directions of development of materials and technologies of their processing for the period to 2030. Aviacionnye materialy i tehnologii, 2012, no. S, pp. 7–17.
3. Kablov E.N. New generation materials. Zashchita i bezopasnost, 2014, no. 4, pp. 28–29.
4. Kablov E.N. VIAM materials and technologies for Aviadvigatel. Permskie aviatsionnyye dvigateli, 2014, no. 31, pp. 43–47.
5. Kalashnikov V.S., Reshetilo L.P., Chuchman O.V., Naprienko S.A. Strength and reliability of rods and rotor blade stamps made of heat-resistant industrial titanium alloys and modern pseudo-α-titanium alloy. Trudy VIAM, 2022, no. 2 (108), paper no. 02. Available at: http://www.viam-works.ru (accessed: May 19, 2022). DOI: 10.18577/2307-6046-2022-0-2-13-31.
6. Kablov E.N., Putyrsky S.V., Yakovlev A.L., Krokhina V.A., Naprienko S.A. Investigation of resistance to fatigue failure of forgings from high-strength titanium alloy VT22M, manufactured with final deformation in (α + β)- and β-regions. Titan, 2021, no. 1 (70), pp. 26–33.
7. Kablov E.N., Kashapov O.S., Pavlova T.V., Nochovnaya N.A. Development of a pilot industrial technology for the manufacture of semi-finished products from pseudo-alpha-titanium alloy VT41. Titan, 2016, no. 2, pp. 33–42.
8. Sviridov A.V., Gribkov М.S. Features of repair of welded structures of large thicknesses from titanium alloy VT6ch. Trudy VIAM, 2021, no. 11 (105), paper no. 04. Available at: http://www.viam-works.ru (accessed: May 13, 222). DOI: 10.18577/2307-6046-2021-0-11-34-43.
9. Makushina M.A., Kochetkov A.S., Nochovnaya N.A. Cast titanium alloys for aviation equipment (review). Trudy VIAM, 2021, no. 7 (101), paper no. 05. Available at: http://www.viam-works.ru (accessed: May 13, 2022). DOI: 10.18577/2307-6046-2021-0-7-39-47.
10. Vasilev A.I., Putyrskiy S.V., Korotchenko A.Yu., Anisimova A.Yu. MIM technology as a method of manufacturing precision parts from metal-powder compositions, including titanium alloys (review). Trudy VIAM, 2021, no. 3 (97), paper no. 02. Available at: http://www.viam-works.ru (accessed: May 13, 2022). DOI: 10.18577/2307-6046-2021-0-3-16-27.
11. Krokhina V.A., Putyrsky S.V., Yakovlev A.L., Nochovnaya N.A. Prospects for the use of β-deformation for high-strength titanium alloy of the transitional class VT22M. Titan, 2019, no. 3 (65), pp. 49–55.
12. Le V.D., Pessard E., Morel F., Prigent S. Fatigue behaviour of additively manufactured Ti–6Al–4V alloy: The role of defects on scatter and statistical size effect. International Journal of Fatigue, 2020, vol. 140. DOI: 10.1016/j.ijfatigue.2020.105811.
13. Soyama H., Okura Y. The use of various peening methods to improve the fatigue strength of titanium alloy Ti6Al4V manufactured by electron beam melting. AIMS Materials Science, 2018, vol. 5 (5), pp. 1000–1015. DOI: 10.3934/matersci.2018.5.1000.
14. El-Chaikh A., Danzig A., Muenter D. Effect of Microstructure on Fatigue Properties of Several Ti-Alloys for Aerospace Application. The 14th World Conference on Titanium, 2020, vol. 321, pp. 13. DOI: 10.1051/matecconf/202032104015.
15. Wu G.Q., Shi C.L., Sha W. et al. Effect of microstructure on the fatigue properties of Ti–6Al–4V titanium alloys. Materials and Design, 2012, vol. 46, pp. 668–674. DOI: 10.1016/j.matdes.2012.10.059.
16. Wang B., Cheng L., Li D. Experimental Study on Forged TC4 Titanium Alloy Fatigue Properties under Three-Point Bending and Life Prediction. Materials, 2021 vol. 14, pp. 5329. DOI: 10.3390/ma14185329.
17. Yuri T., Ono Y., Ogata T. et al. Effect of microstructure on high-cycle fatigue properties of Ti–6Al–4V alloy forging at cryogenic temperatures. AIP Conference Proceedings, 2014, vol. 1574, pp. 27–33. DOI: 10.1063/1.4860600.
18. Hidalgo A.A., Limberg W., Ebel T. et al. Influence of Alloying Elements in Fatigue Properties of α/β Titanium Alloys. Key Engineering Materials, 2018, vol. 770, pp. 80–86. DOI: 10.4028/www.scientific.net/KEM.770.80.

Pages:: 36-50

Keywords: multilayer materials, layered structure, impact strength, titanium alloys, hot rolling, microstructure, fractography

Reference List

1. Kablov E.N. Marketing of materials science, aircraft building and industry: present and future. Direktor po marketingu i sbytu, 2017, no. 5–6, pp. 40–44.
2. Mirzaev D.A., Schastlivtsev I.M., Tabatchikova T.I., Tereshchenko N.A., Yakovleva I.L. The effect of increasing impact strength during the formation of a layered structure in the process of hot rolling of ferritic steel. Doklady Akademii nauk, 2010, vol. 433, no. 1, pp. 42–45.
3. Anoshkin N.F., Bochvar G.A., Livanov V.A. Titanium alloys. Metallography of titanium alloys. Moscow: Metallurgiya, 1980, 464 p.
4. Miklyaev P.G., Neshpor G.S., Kudryashov V.G. Kinetics of destruction. Moscow: Metallurgiya, 1979, 279 p.
5. Karpov M.I., Vnukov V.I., Volkov K.G. Possibilities of the vacuum rolling method as a method for obtaining multilayer composites with nanometric layer thicknesses. Materialovedenie, 2004, no. 1, pp. 48–53.
6. Method for obtaining metal sheets with a stable submicro- and nanoscale structure: pat. 2380234 Rus. Federation; filed 08.08.08; publ. 27.01.10.
7. Kolesnikov A.G., Plokhikh A.I., Komisarchuk Yu.S., Mikhaltsevich I.Yu. Investigation of the features of the formation of submicro- and nano-sized structures in multilayer materials by hot rolling. Metallovedenie i termicheskaya obrabotka metallov, 2010, no. 6, pp. 44–49.
8. Sarkeeva A.A., Kruglov A.A., Borodin E.M. et al. Behavior under shock loading of a layered material from a titanium alloy. Fizicheskaya mezomekhanika, 2012, vol. 15, vol. 5, pp. 51–57.
9. Sarkeeva A.A. Mechanical Behavior under Impact Loading of a Structural Composite of Titanium Alloy VT6. Pisma o materialakh, 2012, vol. 2, pp. 166–169.
10. Khorev A.I. Modern methods for increasing the structural strength of titanium alloys. Moscow: Voyenizdat, 1979, 256 p.
11. Dzunovich D.A., Alekseyev E.B., Panin P.V., Lukina E.A., Novak A.V. Structure and properties of sheet semi-finished products from various wrought intermetallic titanium alloys. Aviacionnye materialy i tehnologii, 2018, no. 2 (51), pp. 17–25. DOI: 10.18577/2071-9140-2018-0-2-17-25.
12. Plokhikh A.I., Putyrsky S.V., Nochovnaya N.A. et al. Investigation of the structure and properties of multilayer materials based on titanium alloys. Titan, 2016, no. 4 (54), pp. 13–20.
13. Belov S.P., Brun M.Ya., Glazunov S.G. Metal science of titanium and its alloys. Moscow: Metallurgy, 1992, 107 p.
14. Kablov E.N., Nochovnaya N.A., Shiryaev A.A., Davydova E.A.Investigation of structural and phase transformations in metastable β-titanium alloys and effect of cooling rate from homogenization temperature on structure and properties of VT47 alloy. Part 1. Trudy VIAM, 2020, no. 6–7 (89), paper no. 01. Available at: http://www.viam-works.ru (accessed: May 17, 2022). DOI: 10.18577/2307-6046-2020-67-3-10.
15. Kablov E.N., Nochovnaya N.A., Shiryaev A.A., Davydova E.A. Investigation of structural and phase transformations in metastable β-titanium alloys and effect of cooling rate from homogenization temperature on structure and properties of VT47 alloy. Part 2. Trudy VIAM, 2020, no. 8 (90), paper no. 02. Available at: http://www.viam-works.ru (accessed: May 17, 2022). 10.18577/2307-6046-2020-0-8-11-19.
16. Panin P.V., Nochovnaya N.A., Kablov D.E., Alekseev E.B., Shiryaev A.A., Novak A.V. A practical guide to the metallography of alloys based on titanium and its intermetallic compounds: textbook. Ed. E.N. Kablov. Moscow: VIAM, 2020, 200 p.
17. Kablov E.N., Kashapov O.S., Medvedev P.N., Pavlova T.V.Study of a α+β-titanium alloy based on a system of Ti–Al–Sn–Zr–Si–β-stabilizing alloying elements. Aviacionnye materialy i tehnologii, 2020, no. 1 (58), pp. 30–37. DOI: 10.18577/2071-9140-2020-0-1-30-37.
18. Duyunova V.A., Putyrskiy S.V., Arislanov A.A., Krokhina V.A., Shiryaev A.A. Analysis of the effect of heat treatment on the structure and mechanical proper-ties of bars made of VT47 titanium alloy. Aviation materials and technologies, 2021, no. 4 (65), paper no. 03. Available at: http://www.journal.viam.ru (accessed: May 29, 2022). DOI: 10.18577/2713-0193-2021-0-4-26-34.
19. Santhosh R., Geetha M., NageswaraRao M. Recent Developments in Heat Treatment of Beta Titanium Alloys for Aerospace Applications. Transactions of the Indian Institute of Metals, 2017, vol 70 (7), pp. 1681–1688.
20. Boyer R.R., Briggs R.D. The Use of β Titanium Alloys in the Aerospace Industry. Journal of Materials Engineering and Performance, 2005, vol. 14 (6), pp. 681–685.
21. Safonov M.D. Development and study of a multilayer steel material with high-temperature anisotropy of thermal expansion: thesis, Cand. Sc. (Tech.). Moscow: Bauman MSTU, 2019, 164 p.
22. Trykov Yu.P., Shmorgun V.G., Gurevich L.M. Deformation of layered composites. Volgograd: VolGTU; Polytechnic, 2001, 240 p.
23. Kobelev A.G., Lysak V.I., Chernyshev V.N. et al. Production of metallic layered composite materials. Moscow: Intermet Inzhiniring, 2002, 496 p.
24. Plokhikh A.I., Putyrskiy S.V. A fracture model for a multilayer metallic material. Proceeding of the 14th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Ekaterinburg, 2020, pp. 3–13.
25. Sukhanov D.A., Sukhanova L.N., Bataeva Z.B. Influence of the dispersion of layers of multilayer steels on the nature of the propagation of viscous, brittle and fatigue cracks. Proceedings of the 2nd Intern. conf. "Experimental methods in the physics of structurally inhomogeneous condensed matter". Barnaul: Altay State Univ., 2001, pp. 228–233.
26. Pogodin-Alekseev G.I. Dynamic strength and brittleness of metals. Moscow: Mashinostroenie, 1966, 243 p.
27. Steffens H.D., Brockman W. Manufacture and Properties of Laminated Metallic Composite Materials. Adhesion, 1973, no. 2, pp. 36–46.
28. Ganeeva A.A., Kruglov A.A., Lutfullin R.Ya. Destruction of layered material with different arrangement of joint surfaces. Perspektivnye materialy, 2011, no. 12, pp. 92–96.

Pages:: 51-62

Keywords: aluminum-lithium alloys, flux, inert gas, lining material, melting, casting, ingot, degassing

Reference List

1. Kablov E.N., Antipov V.V., Oglodkova Yu.S., Oglodkov M.S. Experience and prospects for the use of aluminum-lithium alloys in products of aviation and space technology. Metallurg, 2021, no. 1, pp. 62–70.
2. Kablov E.N., Antipov V.V., Klochkova Yu.Yu. Aluminium-lithium alloys of a new generation and layered aluminum-glass plastics based on them. Tsvetnye metally, 2016, no. 8 (884), pp. 86–91.
3. Kablov E.N. Materials of the new generation – the basis of innovation, technological leadership and national security of Russia. Intellekt i tekhnologii, 2016, no. 2 (14), pp. 42–47.
4. Antipov V.V., Tkachenko E.A., Zajtsev D.V., Selivanov A.A., Ovsyannikov B.V. Тhe influence of homogenizing annealing regimes on the structural phase state and mechanical properties of aluminum-lithium alloy 1441 ingots. Trudy VIAM, 2019, no. 3 (75), paper no. 05. Available at: http://www.viam-works.ru (accessed: April 15, 2022). DOI: 0.18577/2307-6046-2019-0-3-44-52.
5. Shchetinina N.D., Rudchenko A.S., Selivanov A.A. The approaches that are used for developed of optimal strain modes of aluminum-lithium alloys (review). Trudy VIAM, 2020, no. 8 (90), paper no. 03. Available at: http://www.viam-works.ru (accessed: April 10, 2022). DOI: 10.18577/2307-6046-2020-0-8-20-34.
6. Panteleev M.D., Sviridov A.V., Skupov A.A., Odintsov N.S. Perspective welding technologies of aluminum-lithium alloy V-1469 applied to fuselage panels. Trudy VIAM, 2020, no. 12 (94), paper no. 04. Available at: http://www.viam-works.ru (accessed: April 15, 2022). DOI: 10.18577/2307-6046-2020-0-12-35-46.
7. Fridlyander I.N., Chuistov K.V., Berezina A.L. Aluminum-lithium alloys. Structure and properties. Kyiv: Naukova Dumka, 1992, 192 p.
8. Prasad N.E., Gokhale A.A., Wanhill R.J.H. Aluminum-Lithium Alloys: Processing, Properties, and Applications. Oxford: Butterworth-Heinemann, 2013, 643 p.
9. Dorin T., Vahid A., Lamb J. Aluminium-lithium alloys. Fundamentals of aluminium metallurgy: recent advances. Ed. R .Lumley. Duxford: Woodhead Publishing, 2018, pp. 387–438.
10. Akhtar N., Akhtar W., Wu S.J. Melting and casting of lithium containing aluminium alloys. International Journal of Cast Metals Research, 2015, vol. 28, no. 1, pp. 20–27.
11. Grushko O.E., Ovsyannikov B.V., Ovchinnikov V.V. Aluminum-lithium alloys: metallurgy, welding, metallurgy. Moscow: Nauka, 2014, 296 p.
12. Grushko O.E., Danilkin V.A., Zasypkin V.A., Talaev V.S. Hydrogen in aluminum alloys with lithium. Tekhnologiya legkikh splavov, 1975, no. 3, pp. 7–11.
13. Talbot D.E.J. The effects of hydrogen in aluminium and its alloys Solidification Processing. London: The Institute of Materials, Minerals and Mining, 2004, 256 p.
14. Anyalebechi P.N. Analysis of the effects of alloying elements on hydrogen solubility in liquid aluminum alloys. Scripta Metallurgica et Materialia, 1995, vol. 3, no 8, pp. 1209–1216.
15. Komarov S.B., Mozharovsky S.M., Ovsyannikov B.V., Makarov G.S., Grushko O.E. Protection and refining of aluminum-lithium alloys with fluxes. Tsvetnye metally, 1995, no. 10, pp. 57–60.
16. Birch M.E.J. Grain refining of aluminium-lithium based alloys with titanium boron aluminium. Processing the Third International Conference of Aluminium-Lithium Alloys. Oxford: The Institute of Metals, 1986, pp. 152–158.
17. Chakravorty C.R., Singh V., Gokhale A.A. Melting and casting of aluminium-lithium alloys. Proceedings of the 36th Annual Convention of Institute of Indian Foundrymen (IIF). Calcutta: The Institute of Indian Foundrymen, 1987, pp. 135–140.
18. Ashton R.F., Thompson D.S., Starke Jr.E.A., Lin F.S. Processing Al–Li–Cu–(Mg) alloys. Processing the Third International Conference of Aluminium-Lithium Alloys. Oxford: The Institute of Metals, 1986, pp. 66–77.
19. Averill W.A., Olsen D.L., Matlock D.K., Edwards G.R. Lithium reactivity and containment. Proceedings of the First International Aluminium-Lithium Conference. Warrandale: The Metallurgical Society of AIME, 1981, pp. 9–28.
20. Refractory assembly for containment of molten Al–Li alloys: pat. no. US 4,581,295; filed 03.04.85; publ. 08.04.86.
21. Toyoshima M., Kurino S., Ohara K., Wakasaki O. Behaviour of Refractory Materials for AI–Li Alloy. Proceedings of the 4th International Conference on Aluminium Alloys (ICAA 4). Georgia Institute of Technology, 1994, vol. 2, pp. 114–121.
22. Aluminum alloys. Melting and casting of aluminum alloys: a reference guide. Ed. V.I. Dobatkin. Moscow: Metallurgy, 1970, 416 p.
23. Antipov V.V., Serebrennikova N.Yu., Nefedova Yu.N., Kozlova O.Yu., Panteleev M.D., Osipov N.N., Klychеv A.V. Manufacturing capability of Al–Li 1441 alloy details. Trudy VIAM, 2018, no. 10 (70), paper no. 03 Available at: http://www.viam-works.ru (accessed: April 15, 2022). DOI: 10.18577/2307-6046- 2018-0-10-17-26.

Pages:: 63-76

Keywords: structural optics product, aviation glazing, polycarbonate, molding method, lining sheet, molding package, molding equipment, aberation, viewing sector, line deformation, square distortion, image blur

Reference List

1.   Solinov V.F Structural optics. Moscow: Onebook.ru, 2007, pр. 28–58.

2.   Solinov V.F., Grinshtein Yu.L. Technical glass in aviation. Samolet, 1993, no. 2, pp. 26–28.

3.   Solinov V.F. Experience in the use of aviation glass in spacecraft and the prospects for their further modification. Proceedings of the 1st Intern. aerospace conf. "Man–Earth–Space": in 7 vols. Moscow, 1995, vol. 5, pp. 192–200.

4.   Solinov V.F., Grinshtein Yu.L., Izotov R.S. Ways to improve the reliability of aircraft structural optics products. Aviatsionnaya promyshlennost, 1976, no. 10, pp. 72–74.

5.   Solinov V.F. Structural optics. Moscow: Onebook.ru, 2007, pр. 102–125.

6.   Smirnova O.V., Erofeeva S.B. Polycarbonates. Moscow: Chemistry, 1975, pp. 13–191.

7.   Chechin D.E., Shatalin N.V. Development of technology for molding and triplexing complex-profile optical products. Proceedings of the XXII Intern. sci.-tech. conf. "Designs and technologies for obtaining products from non-metallic materials" (Obninsk, October 15–17, 2019). Obninsk, 2019, 32 p.

8.   Serazutdinov S.G., Sidorin S.G., Khairulin F.S. Polycarbonate. Application in modern construction. Moscow: Sofplast, 2010, pp. 10–78.

9.   Kryzhanovsky V.K., Kerber M.L., Burlov V.V., Panimatchenko A.D. Manufacture of products from polymeric materials. Moscow: Khimiya, 2008, pp. 65–66.

10. Martin V.D. Brief encyclopedia on the structure of materials. Moscow: Nauka, 2011, pp. 410–417.

11. Gudimov M.M., Perov B.V. Organic glass. Moscow: Chemistry, 1981, 216 p.

12. Kumanin K.G. Shaping of optical surfaces. Moscow: Oborongiz, 1962, 431 p.

13. Butukov E.I. Optics. St. Petersburg: Nevsky dialect; BHB-Petersburg, 2003, pp. 311–333.

14. Begunov B.N. Geometric optics. Moscow: MGU, 1961, 226 p.

15. Begunov B.N. Transformation of optical images. Moscow: Iskusstvo, 1965, 411 p.

16. Kharitonov G.M., Khitrova O.I. Stress-strain state of monolayer glazing of aircraft lights. Aviatsionnaya promyshlennost, 1993, no. 5–6, pp. 55–60.

Pages:: 77-84

Keywords: epoxy resins, bismaleimide resins, the interpenetrating networks, IR-spectroscopy

Reference List

1.   Sperling L. Interpenetrating polymer networks and similar materials. Moscow: Mir, 1984, 328 p.

2.   Musto P., Martuscelli E., Ragosta G. et al. FTIR spectroscopy and physical properties of an epoxy/Bismaleimide IPN system. Journal of Materials Science, 1998, vol. 33, p. 4595.

3.   Musto P. Two-Dimensional FTIR Spectrodcopt Dtudies on the Thermal-Oxidative Degradation of Epoxy-Bis(maleimide) Networks. Macromolecules, 2003, vol. 36, pp. 3210.

4.   Kim D.S., Han M.J., Lee J.R. Polyimides and High Performance Organic Polymers. Polymer Engineering and Science, 1995, vol. 35, pp. 1353.

5.   Woo E.M., Chen L.B., Seferis J.C. Characterization of epoxy-bismaleimide netork matrices // Journal of Materials Science, 1987, vol. 22, pp. 665.

6.   Lipatov Yu.S., Sergeeva L.M. Interpenetrating polymer networks. Kyiv: Naukova Dumka, 1979, 160 p.

7.   Frisch K.C., Klempner D. Glass transition of topological interpenetrating polymer networks. Polymer Engineering and Science, 1974, vol. 14, no. 1, pp. 76–78.

8.   Thomas D., Sperling L.S. Interpenetrating polymer networks. Polymer blends. Trans. from Engl. Ed. D. Paul, S. Newman. Moscow, 1981, vol. 2, pp. 5–38.

9.   Chakrabarty D. Interpenetrating polymer networks: Engineering properties and morphology. Polymer Gels and Networks, 1998, no. 6, pp. 192–200.

10. Velan T.V., Bilan I.M. Aliphatic amine cured PDMS-epoxy interpenetrating networks system for high performance engineering application – Development and Characterization. Bulletin of Materials Science, 2000, vol. 23, no. 5, pp. 425–427.

11. Epoxy adhesive: pat. EN 2520479C1; filed 10.12.12, opubl. 27.06.14.

12. Kim D.S., Han M.J., Lee J.R. Cure behavior and Properties of an Epoxy resin Modified With a Bismaleimide Resin. Polymer engineering and science, 1995, vol. 35, no. 17, pp. 1353–158.

13. Wu C-S, Liu Y-L, Hsu K-Y. Maleimide-epoxy resins: preparation, thermal properties, and flame retardance. Polymer, 2003, no. 44, pp. 565–573.

14. Bazhenov S.L., Berlin A.A., Kulkov A.A., Oshmyan V.G. Polymer composite materials. Strength and technology. Dolgoprudny: Intellekt, 2010, 352 p.

15. Mikhailin Yu.A. Structural polymeric composite materials. St. Petersburg: Nauchnye osnovy i tekhnologii, 2008, 822 p.

Pages:: 85-93

Keywords: fiberglass, glass fiber, phthalonitrile binder, dielectric constant, dielectric loss tangent

Reference List

1. Kablov E.N. What is the future to be made of? Materials of a new generation, technologies for their creation and processing – the basis of innovation. Krylya Rodiny, 2016, no. 5, рр. 8–18.
2. Sargsyan A.S. High-strength glass-reinforced plastics based on heat-resistant and heat-resistant polymeric binders for marine electronics products: thesis, Cand. Sc. (Tech.). St. Petersburg, 2016, 143 p.
3. Kablov E.N., Chursova L.V., Babin A.N., Mukhametov R.R., Panina N.N. Developments of FSUE «VIAM» in the field of melt binders for polymer composite materials. Polimernye materialy i tekhnologii, 2016, vol. 2, no. 2, pp. 37–42.
4. Kurnosov A.O., Raskutin A.E., Mukhametov R.R., Melnikov D.A. Polymer composite materials based on thermosetting polyimide binders for aerospace engineering. Review. Voprosy materialovedeniya, 2016. no. 4, рр. 50–62.
5. Davydova I.F., Kavun N.S. Heat-resistant sealed fiberglass. Vse materialy. Entsiklopedicheskiy spravochnik, 2011, no. 11, pp. 18–20.
6. Davydova I.F., Kablov E.N., Kavun N.S. Heat-resistant non-combustible polyimide fiberglass for products of aviation and rocket technology. Vse materialy. Entsiklopedicheskiy spravochnik, 2009, no. 7, pp. 2–11.
7. Sarychev I.A., Serkova E.A., Khmelnitsky V.V., Zastrogin O.B. Thermosetting binders for aircraft floor panel materials (review). Trudy VIAM, 2019, no. 7 (79), paper no. 03. Available at: http://www.viam-works.ru (accessed: March 01, 2022). DOI: 10.18577/2307-6049-2019-0-7-26-33.
8. Gunyaeva A.G., Kurnosov A.O., Gulyaev I.N.High-temperature polymer composite materials developed FSUE «VIAM» for aerospace engineering: past, present and future (review). Trudy VIAM, 2021, no. 1 (95), paper no. 05. Available at: http://www.viam-works.ru (accessed: March 24, 2022). DOI: 10.18577/2307-6046-2021-0-1-43-53.
9. Kablov E.N., Valueva M.I., I.V. Zelenina, Khmelnitskiy V.V., AleksashinV.M.Carbon plastics based on benzoxazine oligomers – perspective materials. Trudy VIAM, 2020, no. 1, paper no. 07. Available at: http://www.viam-works.ru (accessed: March 24, 2022). DOI: 10.18577/2307-6046-2020-0-1-68-77.
10. Kablov E.N., Startsev O.V., Krotov A.S., Kirillov V.N. Climatic aging of aviation composite materials. III. Significant factors of aging. Deformatsiya i razrusheniye materialov, 2011, no. 1, pp. 34–40.
11. Vavilova M.I., Kavun N.S. The properties of glass filler for constructions of fiberglass. Aviacionnye materialy i tehnologii, 2014, no. 3, pp. 33–37. DOI: 10.18577/2071-9140-2014-0-3-33-37.
12. Gurtovnik I.G., Sportsman V.N. Fiberglass for radio engineering purposes. Moscow: Khimiya, 1987, 160 p.
13. Kurnosov A.O., Vavilova M.I., Gulyaev I.N., Mukhametov R.R. Solution-free technology for manufacturing a prepreg based on a high-temperature powdered phthalonitrile binder. Voprosy materialovedeniya, 2021, no. 4 (108), p. 165.
14. Sazhin B.I., Lobanov A.M., Romanovskaya O.S. et al. Electric properties of polymers. Moscow: Khimiya, 1977, 192 p.
15. Druzhinina T.V., Redina L.V. Polymer composite materials: basic concepts of obtaining and properties: textbook. Moscow: Kosygin MSTU, 2010, 44 p.
16. Mikhailin Yu.A. Fibrous polymeric composite materials in engineering. St. Petersburg: Nauchnye osnovy i tekhnologii, 2013, 720 p.
17. Zharinov M.A., Shimkin A.A., Akhmadiyeva K.R., Zelenina I.V. Features and properties of solvent-free PMR-type polyimide resin. Trudy VIAM, 2018, no. 12 (72), paper no. 05. Available at: http://www.viam-works.ru (accessed: March 24, 2022). DOI: 10.18577/2307-6046-2018-0-12-46-53.

Pages:: 94-103

Keywords: epoxy binder, fiberglass, curing, optimization, kinetics of the heating process

Reference List

1. Petrova A.P., Malysheva G.V. Adhesives, adhesive binders, adhesive prepregs. Ed. E.N. Kablov. Moscow: VIAM, 2017, 472 p.
2. Kablov E.N. Formation of domestic space materials science. Vestnik Rossiyskogo fonda fundamentalnykh issledovaniy, 2017, no. 3 (95), pp. 97–105. DOI: 10.22204/2410-4639-2017-095-03-97-105.
3. Savin S.P. The use of modern polymer composite materials in the airframe design of aircraft of the MS-21 family. Izvestiya Samarskogo nauchnogo tsentra Rossiyskoy akademii nauk, 2012, vol. 14, no. 4 (2), pp. 686–693.
4. Kablov E.N., Chursova L.V., Lukina N.F., Kutsevich K.E., Rubtsova E.V., Petrova A.P. Study of epoxy-polysulfone polymer systems as the basis for high-strength adhesives for aviation purposes. Klei. Germetiki. Tekhnologii, 2017, no. 3, pp. 7–12.
5. Arinina M.P., Kostenko V.A., Gorbunova I.Yu., Ilyin S.O., Malkin A.Ya. Kinetics of curing an epoxy oligomer with diaminodiphenylsulfone. Rheology and calorimetry. Vysokomolekulyarnye soyedineniya. Series A, 2018, vol. 60, no. 5, pp. 418–425. DOI: 10.1134/S2308112018050012.
6. Marakhovsky P.S., Barinov D.Ya., Pavlovsky K.A., Aleksashin V.M. Curing of multilayer polymeric composite materials. Part 1. Mathematical modeling of heat transfer during the formation of a thick carbon fiber plate. Vse materialy. Entsiklopedicheskiy spravochnik, 2018, no. 2, pp. 16–22.
7. Fedoseev M.S., Derzhavinskaya L.F. Heat-resistant polymers and composites based on epoxy binders of various chemical nature. Vestnik Permskogo federal'nogo issledovatel'skogo tsentra, 2022, no. 2, pp. 17–26. DOI: 10.7242/2658-705X/2022.2.2.
8. Veshkin E.A., Postnov V.I., Krasheninnikova E.V. Microhardness and sclerometry as criteria for the degree of hardening of the binder EDT-69N. Materialovedenie, 2018, no. 10, pp. 3–7. DOI: 10.31044/1684-579Х-2018-0-10-3-7.
9. Veshkin E.A., Semenychev V.V., Postnov V.I., Krasheninnikova E.V. Research of sclerometric furgles geometry obtained at cured binding EDT-69N at different load levels for inductor. Trudy VIAM, 2020, no. 3 (87), paper no. 08. Available at: http://www.viam-works.ru (accessed: October 31, 2022). DOI: 10.18577/2307-6046-2020-0-3-74-81.
10. Dmitriev O.S., Zhivenkova A.A. Numerical-analytical solution of the nonlinear coefficient inverse problem of heat conduction. Inzhenerno-fizicheskij zhurnal, 2018, vol. 91, no. 6, pp. 1425–1437.
11. Gilev V.G., Komar L.A., Osorgina I.V., Pelevin A.G. Experimental study of the curing processes of the epoxy binder ED-20. Vestnik Permskogo universiteta. Ser.: Physics, 2019, no. 4, pp. 17–23. DOI: 10.17072/1994-3598-2019-4-17-23.
12. Ivanov N.V., Gurevich Ya.M., Khaskov M.A., Akmeev A.R. Mode studying curing binding
    VSE-34 and its influences on mechanical properties. Aviacionnyye materialy i tehnologii, 2017, no. 2, pp. 50–55. DOI: 10.18577/2071-9140-2017-0-2-50-55.
13. Kaledin V.O., Strakhov V.L. Determination of high-temperature thermophysical characteristics of carbon plastics. Polymer composite materials for the aerospace industry: proceedings of the conf. Moscow: VIAM, 2019, pp. 137–153.
14. Chen Yanyan, Marakhovskij P.S., Malysheva G.V. Determination of thermophysical properties of epoxy materials during their curing. Trudy VIAM, 2018, no. 9 (69), paper no. 12. Available at: http://www.viam-works.ru (accessed: October 31, 2022). DOI: 10.18577/2307-6046-2018-0-9-119-123.
15. Dmitriev O.S., Zhivenkova A.A., Dmitriev A.O. Modeling of thermophysical characteristics of polymer composite materials during curing. Information-sensor systems in thermophysical research: Sci. works of scientific International scientific conf: in 2 vols. Moscow: Tambov, 2018, vol. 1, pp. 107–110.
16. Dmitriev O.S., Barsukov A.A. Neural network modeling of the kinetic characteristics of the curing process of polymer composites. Informatics: problems, methods, technologies: materials of the
    XX Int. scientific method. conf. Voronezh, 2020, pp. 447–452.
17. Dmitriev O.S., Barsukov A.A. Modeling of the kinetic characteristics of the curing process of polymer composites. Modern technologies in science and education (STNO-2020): proceedings of the III Int. sci.-tech. forum. Ryazan, 2020, pp. 31–35.
18. Chen Ya., Maung P.P., Malysheva G.V. Study of the kinetics of the curing process of a thin-walled structure made of carbon fiber. Vestnik MGTU im. N.E. Baumana. Ser.: Mechanical engineering, 2020, no. 5, рр. 58–70. DOI: 10.18698/0236-3941-2020-5-58-70.
19. Goncharov V.A., Timoshkov P.N., Usacheva M.N. Prospects of the production of large-sized aircraft parts from polymer composite materials (review). Trudy VIAM, 2021, no. 12 (106), paper no. 07. Available at: http://www.viam-works.ru (accessed: October 31, 2022). DOI: 10.18577/2307-6046-2018-0-8-55-62.
20. Kolobkov A.S. Polymer composite materials for various aircraft structures (review). Trudy VIAM, 2020, no. 6–7 (89), paper no. 05. Available at: http://www.viam-works.ru (accessed: October 31, 2022). DOI: 10.18577/2307-6046-2020-0-67-38-44.
21. Delaminations and cracks – Boeing 787 Dreamliner and Airbus A380 aircraft have manufacturing defects. Available at: http://fea.ru/news/3355 (accessed: October 31, 2022).
22. Volkov D.P., Egorov A.G., Mironenko M.E. Thermophysical properties of polymer composite materials. Nauchno-tekhnicheskiy vestnik informatsionnykh tekhnologiy, mekhaniki i optiki, 2017, no. 2, vol. 17, pp. 287–293. DOI: 10.17586/2226-1494-2017-17-2-287-293.
23. Goncharov V.A., Raskutin A.E. Computer modeling of the infusion process in the manufacture of composite arched element. Trudy VIAM, 2015, no. 7, paper no. 11. Available at: http://www.viam-works.ru (accessed: April 19, 2021). DOI: 10.18577/2307-6046-2015-0-7-11-11.
24. State Standard R 56754. Plastics. Differential Scanning Calorimetry (DSC). Part 4. Determination of specific heat capacity. Moscow: Standartinform, 2016, 14 p.
25. Netzsch test equipment. Available at: www.netzsch-thermal-analysis.com/ru (accessed: April 19, 2021).
26. Zhuravlev V.A. Application of the "ideal point" method and taking into account risks when choosing the best projects. Interactive Science, 2019, vol. 35, no. 1, pp. 34–37.
27. Arisova E.M. Determining the rating of objects. Vestnik VSU. Ser.: System analysis and information technology, 2014, no. 2, pp. 51–56.

Pages:: 104-121

Keywords: friction material, ceramic matrix composite, structural and technological factors, operational properties, braking systems

Reference List

1. Krenkel W., Langhof N. Ceramic matrix composites for high performance friction applications. Proceedings of the IV Advanced Ceramics and Applications Conference. 2017, pp. 13–28.
2. Gadow R., Jiménez M. Carbon fiber-reinforced carbon composites for aircraft brakes. American Ceramic Society Bulletin. 2019, vol. 98, no. 6, pp. 28–34.
3. Mikhailin Yu.A. Fibrous polymeric composite materials in engineering. St. Petersburg: Nauchnye osnovy i tekhnologii, 2013, 720 p.
4. Blanco C., Bermejo J., Marsh H., Merendez R. Chemical and physical properties of carbon as related to brake performance. Wear, 1997, vol. 213, pp. 1–12.
5. Kramarenko E.I., Kulakov V.V., Kulakov D.V., Mozalev V.V. Optimization of the structure and properties of carbon-carbon composite materials for friction purposes. Treniye i smazka v mashinakh i mekhanizmakh, 2007, no. 2, pp. 28–34.
6. Hanbook of ceramic composites. Ed. P. Narottam. Boston; Dordrecht; London: Kluver Academic Publishers, 2005, 554 p.
7. Starchenko V.N., Pavlenko M.V., Ovcharenko V.V. Study of the tribological characteristics of friction C–C composites. Visnik SNU im. Volodimira Dalya, 2011, no. 6, pp. 105–109.
8. Kramarenko E.I., Kulakov V.V., Kenigfest A.M. Obtaining and properties of frictional carbon-ceramic materials of class C/SiC. Izvestiya Samarskogo nauchnogo tsentra Rossiyskoy akademii nauk, 2011, vol. 13, no. 4 (3), pp. 759–764.
9. Garshin A.P., Kulik V.I., Matveev S.A., Nilov A.S. Modern technologies for obtaining fiber-reinforced composite materials with a ceramic refractory matrix (review). Novye ogneupory, 2017, no. 4, pp. 20–35.
10. Garshin A.P., Kulik V.I., Nilov A.S. Analysis of the current state and prospects for the commercial application of fiber-reinforced silicon carbide ceramics. Novye ogneupory, 2012, no. 2, pp. 43–52.
11. Fan S., Yang C., He L. et.al. Progress of ceramic matrix composites brake materials for aircraft application. Reviews on Advanced Materials Science, 2016, vol. 44, is. 4, pp. 313–325.
12. Method of making carbon/ceramic matrix composites: pat. US 7,374,709 B2; filed 11.01.05; publ. 20.05.08.
13. Ding Y., Dong S., Zhou Q. et al. Preparation of C/SiC composites by hot pressing, using different C-fiber content as reinforcement. Journal of American Ceramic Society, 2006, vol. 89, no. 4, pp. 1447–1449.
14. Krenkel W., Heindenreich B., Renz R. C/C–SiC composites for advanced friction systems. Advanced engineering materials, 2002, vol. 4, no. 7, pp. 427–436.
15. Woodcraft A.L. Some notes on C/SiC. 2007, 6 p. Available at: http://www.woodcraft.lowtemp.org (accessed: November 15, 2022).
16. Krenkel W. Carbon fiber reinforced CMC for high-performance structures. International Journal of Applied Ceramic Technology, 2004, vol. 1, no. 2, pp. 188–200.
17. Dittrich R. Neuartige technologieansatre zur hersterllung von C/SiC-verbundwerkstoffen: Dissertation Dr.-Ing. Erlangung: Erlangung des akademischen. Press, 2007, 152 p.
18. Khrenov O.V., Dmitrovich A.A., Leshok A.V. Ceramic-metal friction materials: allowance. Minsk, 2011, 42 p.
19. Carbon materials. Available at: https://acrubin.ru/primary-activity/12-uglerodnye-materialy.html (accessed: February 09, 2023).
20. Stepashkin A.A. Efficiency of carbon-carbon composite materials for friction purposes under cyclic loading: thesis, Cand. Sc. (Tech.). Moscow, 2013, 25 p.
21. Heidenreich B. Carbon fibre reinforced SiC materials based on melt infiltration. 6th International conference on high temperature ceramic matrix composites HTCMC 6. New Delhi: Indien, 2007, pp. 1–6.
22. Xu X., Fan S., Zhang L. et al. Tribological behaviour of three-dimensional needled carbon/silicon carbide and carbon/carbon brake pair. Tribology International, 2014, vol. 77, pp. 7–14.
23. Kulik V.I., Nilov A.S., Garshin A.P. et al. Research of tribotechnical characteristics of composite materials with silicon carbide matrix. Novye ogneupory, 2012, no. 8, pp. 45–56.
24. Zhang J., Xu Y., Zhang L., Cheng L. Effect of Braking Speed on Friction and Wear Behaviors of C/C–SiC Composites. International journal of applied ceramic technology, 2007, vol. 4, no. 5, pp. 463–469.
25. El-Hija H.A., Heidenreich B., Krenkel W., Hugel S. Development of C/C–SiC brake pads for high-performance elevators. International journal of applied ceramic technology, 2005, vol. 2, no. 2, pp. 105–113.
26. Krenkel W. C/C–SiC composites for hot structures and advanced friction systems. Ceramic engineering and science proceedings, 2003, vol. 24 (4), pp. 583–592.
27. Garshin A.P., Kulik V.I., Nilov A.S. Analysis of the occurrence, characteristics and methods for minimizing technological defects in ceramic composites with SiC-matrix, obtained by liquid-phase siliconizing. Novye ogneupory, 2019, no. 8, pp. 23–33.

Pages:: 122-144

Keywords: reinforcing fibers, binders, glass-reinforced plastics, carbon-reinforced plastics, organoplastics, adhesive prepregs, strength, modulus of elasticity, aging, moisture saturation

Reference List

1.   Gunyaev G.M., Perov B.V., Shalin R.E. Modern polymer composite materials. Aviatsionnye materialy na rubezhe XX–XXI vekov. Moscow: VIAM, 1994, pp. 187–196.

2.   Borodin M.Ya., Davydova I.F., Kiselev B.A. Heat resistant fiberglass. Aviatsionnye materialy na rubezhe XX–XXI vekov. Moscow: VIAM, 1994, pp. 204–210.

3.   Gunyaev G.M., Rumyantsev A.F., Sorina T.G., Khoroshilova I.P. Structural carbon fiber. Aviatsionnye materialy na rubezhe XX–XXI vekov. Moscow: VIAM, 1994, pp. 211–219.

4.   Mashinskaya G.P. Organoplasty – results and problems. Aviation materials at the turn of the XX–XXI centuries. M.: VIAM, 1994, рр. 219–228.

5.   Aviation materials. Selected Works 1932–2002: Anniversary. sci.-tech. collect. Ed. E.N. Kablov. Moscow: MISIS; VIAM, 2002, 423 p.

6.   Sklyarov N.M. A 70-year-long path – from wood to supermaterials. Ed. E.N. Kablov. Moscow: MISIS; VIAM, 2002, 488 p.

7.   Kablov E.N. The strategic directions of development of materials and technologies of their processing for the period to 2030. Aviacionnye materialy i tehnologii, 2012, no. S, pp. 7–17.

8.   Kablov E.N. Constructional composite materials. Moscow: VIAM, 2012, р. 58.

9.   Grashhenkov D.V., Chursova L.V. Strategy of development of composite and functional materials. Aviacionnye materialy i tehnologii, 2012, no. S, pp. 231–242.

10. Raskutin A.E. Russian polymer composite materials of new generation, their exploitation and implementation in advanced developed constructions. Aviacionnye materialy i tehnologii, 2017, no. S, pp. 349–367. DOI: 10.18577/2071-9140-2017-0-S-349-367.

11. Kablov E.N., Chursova L.V., Babin A.N., Mukhametov R.R., Panina N.N. Developments of FSUE "VIAM" in the field of melt binders for polymer composite materials. Polimernye materialy i tekhnologii, 2016, vol. 2, no. 2, pp. 37–42.

12. Mukhametov R.R., Petrova A.P. Thermosetting binders for polymeric composite materials. Moscow: VIAM, 2021, 528 p.

13. Gutnikov S.I., Lazoryak B.I., Seleznev A.N. Glass fibres. Moscow: MGU, 2010, 53 p.

14. Prashanth S., Subbaya K.M., Nithin K., Sachhidananda S. Fiber Reinforced Composites – A Review. Journal of Material Science & Engineering, 2017, vol. 06, no. 03, art. 1000341.

15. Cao S., Wu Z. Tensile properties of FRP composites at elevated and high temperatures. Journal of applied mechanics, 2008, vol. 11, pp. 963–970.

16. Chikhradze N.M., Japaridze L.A., Abashidze G.S. Properties of Basalt Plastics and of Composites Reinforced by Hybrid Fibers in Operating Conditions. Composites and Their Applications. Ed. H. Ning, 2012, no. 2, pp. 221–246.

17. Colombo C., Vergani L., Burman M. Static and fatigue characterisation of new basalt fibre reinforced composites. Composite Structures, 2012, vol. 94, no. 3, pp. 1165–1174.

18. Dorigato A., Pegoretti A. Fatigue resistance of basalt fibers-reinforced laminates. Journal of Composite Materials, 2012, vol. 46, no. 15, pp. 1773–1785.

19. Fiore V., Scalici T., Di Bella G., Valenza A. A review on basalt fibre and its composites. Composites. Part B: Engineering, 2015, vol. 74, рр. 74–94.

20. Jamshaid H., Mishra R. A green material from rock: basalt fiber – a review. Journal of the Textile Institute, 2016, vol. 107, no. 7, pp. 923–937.

21. Parnas R., Shaw M., Liu Q. Basalt fiber reinforced polymer composites, Technical Report NETCR63. Institute of Materials Science, University of Connecticut, 2007, 133 p.

22. Li Z., Ma J., Ma H., Xu X. Properties and Applications of Basalt Fiber and Its Composites. IOP Conference Series: Earth and Environmental Science, 2018, vol. 186, no. 2, art. 012052.

23. Lu Z., Xian G., Rashid K. Creep behavior of resin matrix and basalt fiber reinforced polymer (Bfrp) plate at elevated temperatures. Journal of Composites Science, 2017, vol. 1, no. 1, art. 1010003.

24. Wang M., Zhang Z., Li Y. et al. Chemical durability and mechanical properties of alkali-proof basalt fiber and its reinforced epoxy composites. Journal of Reinforced Plastics and Composites, 2008, vol. 27, no. 4, pp. 393–407.

25. Lebedev M.P., Startsev O.V., Kychkin A.K. The effects of aggressive environments on the mechanical properties of basalt plastics. Heliyon, 2020, vol. 6, no. 3, art. e03481.

26. Startsev O.V., Lebedev M.P., Kychkin A.K. Aging of Basalt Plastics in Open Climatic Conditions. Polymer Science. Ser. D, 2022, vol. 15, no. 1, pp. 101–109.

27. Kiselev B.A. Glass plastics. Polymer Matrix Composites. Ed. R.E. Shalin. Chapman & Hall, 1995, pp. 228–268.

28. Davydova I.F., Kavun N.S. Fibreglasses ‒ multipurpose composite materials. Aviacionnye materialy i tehnologii, 2012, no. S, pp. 253–260.

29. Carbon fiber and prepreg data sheets. 2022. Available at: https://www.toraycma.com/resources/data-sheets (accessed: January 12, 2022).

30. Carbon fiber. 2022. Available at: https://www.hexcel.com/Resources/DataSheets/ Carbon-Fiber (accessed: January 12, 2022).

31. Granoc Technical data. 2022. Available at: https://www.ngfworld.com/en/skill.html (accessed: January 12, 2022).

32. Carbon fiber UMT. Specifications. Available at: https://umatex.com/production/fiber (accessed: January 19, 2022).

33. Gunyaeva A.G., Sidorina A.I., Kurnosov A.O., Klimenko O.N. Polymeric composite materials of new generation on the basis of binder VSE-1212 and the filling agents alternative to ones of Porcher Ind. and Toho Tenax. Aviacionnye materialy i tehnologii, 2018, no. 3 (52), pp. 18–26. DOI: 10.18577/2071-9140-2018-0-3-18-26.

34. Kolobkov A.S. Polymer composite materials for various aircraft structures (review). Trudy VIAM, 2020, no. 6–7 (89), paper no. 05. Available at: http://www.viam-works.ru (accessed: June 08, 2022). DOI: 10.18577/2307-6046-2020-0-67-38-44.

35. Kevlar Aramid Fiber. Technical Guide. Available at: https://www.dupont.com/content/dam/dupont/amer/us/en/safety/public/docum... (accessed: January 19, 2022).

36. Zylon (PBO fiber) Technical Information. Available at: https://www.toyobo-global.com/seihin/kc/pbo/zylon-p/bussei-p/technical.pdf (accessed: January 20, 2022).

37. Tokarev A.V. Superthread NPP "Termoteks". Proceedings of the 2nd Intern. scientific-practical. conf. "Polymeric materials of the 21st century". Moscow: Chamber of Commerce and Industry of the Russian Federation, 2017, pp. 1–16.

38. Zhelezina G.F. Constructional and functional organoplastics of new generation. Trudy VIAM, 2013, no. 4, paper no. 06. Available at: http://www.viam-works.ru (accessed: June 08, 2022).

39. Morozova T.V., Dvortsevaya A.M., Kupriyanova E.V., Osipchik V.S. Study of promising aramid fibers Rusar-S in personal armor protection. Uspekhi v khimii i khimicheskoy tekhnologii, 2019, no. 6, pp. 65–67.

40. Doriomedov M.S. Aramid fiber market: types, properties, application. Trudy VIAM, 2020, no. 11 (93), paper no. 06. Available at: http://www.viam-works.ru (accessed: June 08, 2022). DOI: 10.18577/2307-6046-2020-0-11-48-59.

41. Zhelezina G.F., Gulyaev I.N., Soloveva N.A. Aramide organic plastics of new generation for aviation designs. Aviacionnye materialy i tehnologii, 2017, no. S, pp. 368–378. DOI: 10.18577/2071-9140-2017-0-S-368-378.

42. Zhelezina G.F., Tikhonov I.V., Chernykh T.E., Bova V.G., Voynov S.I. Aramid fibers of the third generation Rusar NT for reinforcing organotextolites for aviation purposes. Plasticheskiye massy, 2019, no. 3–4, pp. 43–45.

43. Babin A. N. Binding for polymeric composite materials of new generation. Trudy VIAM, 2013, no. 4, paper no. 11. Available at: http://www.viam-works.ru (accessed: June 08, 2022).

44. Antipov V.V., Kotova E.V., Serebrennikova N.Yu., Petrova A.P. Glue binders and glue prepregs for alumopolymeric composite materials. Trudy VIAM, 2018, no. 5 (65), paper no. 06. Available at: http://www.viam-works.ru (accessed: June 08, 2022). DOI: 10.18577/2307-6046-2018-0-5-44-54.

45. Petrovа A.P., Dementyevа L.A., Lukina N.F., Chursova L.V. Adhesive binders for polymer composite materials based on carbon- and glass fillers. Trudy VIAM, 2015, no. 9, paper no. 11. Available at: http://www.viam-works.ru (accessed: June 08, 2022). DOI: 10.18577/2307-6046-2015-0-9-11-11.

46. Gusev Yu.A., Tverdaya O.N., Gromova A.A. Carbon plastic on the basis of binding curing with low temperature and carbon equally strong of the fabric. Trudy VIAM, 2017, no. 6 (54), paper no. 06. Available at: http://www.viam-works.ru (accessed: June 08, 2022). DOI: 10.18577/2307-6046-2017-0-6-6-6.

47. Satdinov R.A. New constructive and technological solutions in the creation of modern elements of aircraft air conditioning. Materials of All-Rus. sci.-tech. conf. "Polymer composite materials of a new generation and technologies for their processing". Moscow: VIAM, 2020, pp. 6–22.

48. Pavlovskij K.A., Yamshhikova G.A., Gunyaeva A.G., Ulkin M.Yu. Development of binding, not sustaining combustion of CFRP, for manufacturing of thick-walled products from polymeric composite materials by method of press formation. Trudy VIAM, 2016, no. 4, paper no. 8. Available at: http://www.viam-works.ru (accessed: June 08, 2022). DOI: 10.18577/2307-6046-2016-0-4-8-8.

49. Mukhametov R.R., Petrova A.P. Thermosetting binders for polymer composites (review). Aviacionnye materialy i tehnologii, 2019, no. 3 (56), pp. 48–58. DOI: 10.18577/2071-9140-2019-0-3-48-58.

50. Zharinov M.A., Shimkin A.A., Akhmadiyeva K.R., Zelenina I.V. Features and properties of solvent-free PMR-type polyimide resin. Trudy VIAM, 2018, no. 12 (72), paper no. 05. Available at: http://www.viam-works.ru (accessed: June 08, 2022). DOI: 10.18577/2307-6046-2018-0-12-46-53.

51. Valueva M.I., Zelenina I.V., Zharinov M.A., Akhmadieva K.R.World market of high temperature polyimide carbon plastic (review). Trudy VIAM, 2019, no. 12 (84), paper no. 08. Available at: http://www.viam-works.ru (accessed: June 08, 2022). DOI: 10.18577/2307-6046-2019-0-12-67-79.

52. Tkachuk A.I., Zagora A.G., Donetsky K.I., Evdokimov A.A. Polymeric matrixes for composite materials used in the construction of quickly built bridge structures. Trudy VIAM, 2020, no. 12 (94), paper no. 07. Available at: http://www.viam-works.ru (accessed: June 08, 2022). DOI: 10.18577/2307-6046-2020-0-12-67-74.

53. Kogan D.I., Chursova L.V., Panina N.N. Perspective polymeric materials for structural composite products with an energy-efficient molding regime. Plasticheskiye massy, 2020, no. 3–4, pp. 52–54.

54. Aviation materials: a reference book in 13 vols. Ed. E.N. Kablov. M.: VIAM, 2015. Vol. 13: Climatic and microbiological resistance of non-metallic materials. 270 p.

55. Muhametov R.R., Petrova A.P., Ponomarenko S.A., Ahmadieva K.R., Pavlyuk B.F. Influence of woven fibrous fillers of various types on properties of cured binder VS-2526K). Trudy VIAM, 2018, no. 3 (63), paper no. 04. Available at: http//www.viam-works.ru (accessed: June 08, 2022). DOI: 10.18577/2307-6046-2018-0-3-28-36.

56. Melekhina M.I., Kavun N.S., Rakitina V.P. Influence of the chemical composition and structure of glass fillers on the properties of epoxy fiberglass. Vse materialy. Entsiklopedicheskiy spravochnik, 2012, no 10, pp. 44–47.

57. Sokolov I.I., Raskutin A.E. Carbon plastics and fibreglasses of new generation. Trudy VIAM, 2013, no. 4, paper no. 09. Available at: http://www.viam-works.ru (accessed: June 08, 2022).

58. Popov Yu.O., Kolokoltseva T.V., Khrulkov A.V. The new generation of materials and technologies for helicopter blade spars. Aviacionnye materialy i tehnologii, 2014, no. S2, pp. 5–9. DOI: 10.18577/2071-9140-2014-0-s2-5-9.

59. Popov Yu.O., Koloкoltseva T.V., Gromova A.A., Gusev Yu.A. Influence of operational factors on the main physical and mechanical properties of a fiberglass product VPS-31. Trudy VIAM, 2021, no. 11 (105). paper no. 08. Available at: http://www.viam-works.ru (accessed: June 08, 2022). DOI: 10.18577/2307-6046-2021-0-11-82-90.

60. Kurnosov A.O., Melnikov D.A., Sokolov I.I. Structural glass-reinforced plastics purposed for aviation industry. Trudy VIAM, 2015, no. 8, paper no. 08. Available at: http://viam-works.ru (accessed: June 08, 2022). DOI: 10.18577/2307-6046-2015-0-8-8-8.

61. Vavilova M.I., Kavun N.S. The properties of glass filler for constructions of fiberglass. Aviacionnye materialy i tehnologii, 2014, no. 3, pp. 33–37. DOI: 10.18577/2071-9140-2014-0-3-33-37.

62. Kirillov V.N., Kavun N.S., Rakitina V.P. et al. Study of the influence of heat and moisture impact on the properties of epoxy fiberglass. Plasticheskiye massy, 2008, no. 9, pp. 14–17.

63. Startsev V.O., Slavin A.V. Carbon and glass reinforced polymer based on solventfree binders resistance to the impact of a moderate cold and moderate warm climate. Trudy VIAM, 2021, no. 5 (99), paper no. 12. Available at: http://www.viam-works.ru (accessed: June 08, 2022). DOI: 10.18577/2307-6046-2021-0-5-114-126.

64. Evdokimov A.A., Petrova A.P., Pavlovskiy K.A., Gulyaev I.N.The influence of climatic ageing on the properties of PCM-based epoxy resin systems. Trudy VIAM, 2021, no. 3 (97), paper no. 12. Available at: http://www.viam-works.ru (accessed: June 08, 2022). DOI: 10.18577/2307-6046-2021-0-3-128-136.

65. Veshkin E.A., Satdinov R.A., Postnov V.I., Strelnikov S.V. Modern polymer materials for manufacture of elements of the air conditioning system in flying apparatus. Trudy VIAM, 2017, no. 12 (60), paper no. 06. URL: http://www.viam-works.ru (accessed: June 08, 2022). DOI: 10.18577/2307-6046-2017-0-12-6-6.

66. Timoshkov P.N., Kolobkov A.S., Kurnosov A.O., Goncharov A.A. Prepregs based on melt binders and PCMs of a new generation based on them for aircraft products. Materials of the V All-Rus. sci.-tech. conf. "Polymer composite materials and production technologies of a new generation". Moscow: VIAM, 2021, pp. 7–20.

67. Starkov A.I., Kutsevich K.E., Tyumeneva T.Yu., Komarov V.A. Development of composite materials based on adhesive prepregs of reduced flammability and requirements for the mechanical characteristics of PCM, taking into account the scope. Materials of All-Rus. sci.-tech. conf. "Polymer composite materials of a new generation and technologies for their processing". Moscow: VIAM, 2020, pp. 69–81.

68. Prepreg Hexcel Data Sheets. Available at: https://www.matweb.com/search/GetMatlsByManufacturer.aspx?navletter=H&ma... (accessed: January 30, 2022).

69. Prepreg Cycom Data Sheets. Available at: https://www.matweb.com/search/GetMatlsByTradename.aspx?tn=CYCOM® (accessed: January 30, 2022).

70. Gunyaeva A.G., Kurnosov A.O., Gulyaev I.N.High-temperature polymer composite materials developed FSUE «VIAM» for aerospace engineering: past, present and future (review). Trudy VIAM, 2021, no. 1 (95), paper no. 05. Available at: http://www.viam-works.ru (accessed: June 08, 2022). DOI: 10.18577/2307-6046-2021-0-1-43-53.

71. Platonov A.A., Dushin M.I. Carbon composites VKU-25 based on unidirectional prepregs. Trudy VIAM, 2015, no. 11, paper no. 06. Available at: http://www.viam-works.ru (accessed: June 08, 2022). DOI: 10.18577/2307-6046-2015-0-11-6-6.

72. Mishurov K.S., Pavlovskiy K.A., Imametdinov E.Sh. fiber reinforced plastic) VKU-27L. Trudy VIAM, 2018, no. 3 (63), paper no. 07. Available at: http://www.viam-works.ru (accessed: accessed: June 08, 2022). DOI: 10.18577/2307-6046-2018-0-3-60-67.

73. Mishurov K.S., Fajzrakhmanov N.G., Ivanov N.V. Environmental effects on properties of CFRP (carbon fiber reinforced plastic) VKU-29. Trudy VIAM, 2017, no. 8 (56), paper no. 08. Available at: http://www.viam-works.ru (accessed: June 08, 2022). DOI: 10.185577/2307-6046-2017-0-8-8-8.

74. Mishurov K.S., Mishkin S.I. Environmental effect on properties of CFRP (Carbon Fiber Reinforced Plastic) VKU-39. Trudy VIAM, 2016, no. 12 (48), paper no. 08. Available at: http://www.viam-works.ru (accessed: June 08, 2022). DOI: 10.18577/2307-6046-2016-0-12-8-8.

75. Zelenina I.V., Gulyayev I.N., Kucherovskiy A.I., Mukhametov R.R. Heat-resistant CFRP for the impulse wheel of the centrifugal compressor. Trudy VIAM, 2016, no. 2 (38), paper no. 08. Available at: http://www.viam-works.ru (accessed: June 08, 2022). DOI: 10.18577/2307-6046-2016-0-2-8-8.

76. Gulyev I.N., Zelenina I.V., Valevin E.O., Khaskov M.A. Influence of climatic ageing on the properties of high-temperature carbon fiber reinforced plastics. Trudy VIAM, 2021, no. 2 (96), paper no. 05. Available at: http://www.viam-works.ru (accessed: June 08, 2022). DOI: 10.18577/2307-6046-2021-0-2-39-51.

77. Valevin E.O., Startsev V.O., Zelenina I.V. Thermal aging, surface degradation and  water transfer in carbon fiber reinforced plastic VKU-38TR. Trudy VIAM, 2020, no. 6–7 (89), paper no. 12. Available at: http://www.viam-works.ru (accessed: June 08, 2022). DOI: 10.18577/2307-6046-2020-0-67-118-128.

78. Sidorina A.I., Safronov A.M., Kutsevich K.E., Klimenko O.N. Carbon fabrics for aircraft products. Trudy VIAM, 2020, no. 12 (94), paper no. 05. Available at: http://www.viam-works.ru (accessed: June 08, 2022). DOI: 10.18577/2307-6046-2020-0-12-47-58.

79. Startsev V.O., Nikolaev E.V., Vardanyan A.M., Nechaev A.A. The influence of climatic factors on residual stresses in nanomodified cyanate ester-based CFRP. Trudy VIAM, 2021, no. 8 (102), paper no. 12. Available at: http://www.viam-works.ru (accessed: June 08, 2022). DOI: 10.18577/2307-6046-2021-0-8-104-112.

80. Startsev O.V., Mashinskaya G.P., Yartsev V.A. Molecular mobility and relaxation processes in an epoxy matrix 2. Effects of weathering in humid subtropical climate. Mechanics of Composite Materials, 1985, vol. 20, no. 4, pp. 406–409.

81. Startsev O.V., Nikishin E.F. Aging of polymer composite materials in open space. Mekhanika kompozitnykh materialov, 1993, no. 4, pp. 457–467.

82. Voynov S.I., Zhelezina G.F., Solovyeva N.A., Yamshchikova G.A. Environmental effects on properties of aramid fiber reinforced plastic manufactured by RTM method. Aviacionnye materialy i tehnologii, 2015, no. 4 (37), pp. 72–78. DOI: 10.18577/2071-9140-2015-0-4-72-78.

83. Zhelezina G.F., Voinov S.I., Kulagina G.S., Solovieva N.A. Experience in the use of melt polymer binders for the manufacture of organoplastic prepregs. Zhurnal prikladnoy khimii, 2020, vol. 93, pp. 378–384.

84. Shuldeshova P.M., Deev I.S., Zhelezina G.F. Features of destruction of SVM aramide fibers and structural organoplastics on their basis. Trudy VIAM, 2016, no. 2 (38), paper no. 11. Available at: http://www.viam-works.ru (accessed: June 08, 2022). DOI: 10.18577/2307-6046-2016-0-2-11-11.

85. Kutsevich K.E., Dementeva L.A., Lukina N.F., Tyumeneva T.Yu. Adhesive prepregs as promising materials for parts and assemblies from polymeric composite materials. Aviacionnye materialy i tehnologii, 2017, no. S, pp. 379–387. DOI: 10.18577/2071-9140-2017-0-S-379-387.

86. Petrova A.P., Lukina N.F., Sharova I.A., Kutsevich K.E., Buznik V.M. Performance of adhesives and materials based on them in conditions close to the coastal conditions of the Arctic. Novosti materialovedeniya. Nauka i tekhnika, 2016, no. 2 (20), paper no. 01. Available at: http://materialsnews.ru (accessed: June 08, 2022).

87. Startsev V.O., Mahonkov A.Yu., Kotova E.A. Mechanical properties and moisture resistance of PCM with damages. Aviacionnye materialy i tehnologii, 2015, no. S1, pp. 49–55. DOI: 10.18577/2071-9140-2015-0-S1-49-55.

88. Startsev V.O., Panin S.V., Startsev O.V. Sorption and diffusion of moisture in polymer composite materials with drop-weight impact damage. Mechanics of Composite Materials, 2016, vol. 51, no. 6, pp. 761–770.

89. Startsev V.O., Il’ichev A.V. Effect of Mechanical Impact Energy on the Sorption and Diffusion of Moisture in Reinforced Polymer Composite Samples on Variation of Their Sizes. Mechanics of Composite Materials, 2018, vol. 54, no. 2, pp. 145–154.

90. Kablov E.N., Startsev V.O., Inozemtsev A.A. The moisture absorption of structurally similar samples from polymer composite materials in open climatic conditions with application of thermal spikes. Aviacionnye materialy i tehnologii, 2017, no. 2 (47), pp. 56–68. DOI: 10.18577/2071-9140-2017-0-2-56-68.

91. Kutsevich K.E., Tyumeneva T.Yu., Petrova A.P. Influence of fillers on properties of adhesive prepregs and PCM on their basis. Aviacionnye materialy i tehnologii, 2017, no. 4 (49), pp. 51–55. DOI: 10.18577/2071-9140-2017-0-4-51-55.

92. Kutsevich K.E., Dementeva L.A., Lukina N.F. Properties and application of polymer composite materials based on glue prepregs. Trudy VIAM, 2016, no. 8, paper no. 7. Available at: http://www.viam-works.ru (accessed: June 08, 2022). DOI: 10.18577/2307-6046-2016-0-8-7-7.

93. Startsev V.O., Nikolaev E.V. Stability of the properties of carbon fiber VKU-49 during long-term exposure to water. Vse materialy. Entsiklopedicheskiy spravochnik, 2018, no. 12, pp. 13–20.

94. Startsev V.O. Across-the-thickness gradient of the interlaminar shear strength of a CFRP after its long-term exposure to a marine climate. Mechanics of Composite Materials, 2016, vol. 52, no. 2, pp. 171–176.

95.       Kablov E.N., Startsev V.O. Climatic Aging of Aviation Polymer Composite Materials: II. Development of Methods for Studying the Early Stages of Aging. Russian Metallurgy (Metally), 2020, vol. 2020, no. 10, pp. 1088–1094.

Pages:: 145-155

Keywords: the heat stabilizer, thermal-oxidative degradation, impact resistance, flexural resistance, thermogravimetric analysis, breaking strength, percentage elongation

Reference List

1. Zhitomirsky G.I. Aircraft design. Moscow: Mashinostroenie, 1991, 400 p.
2. Kablov E.N. Aviation materials science: results and prospects. Vestnik Rossiyskoy akademii nauk, 2002, vol. 72, no. 1, pp. 3–12.
3. Kablov E.N. The role of chemistry in the creation of new generation materials for complex technical systems. Report of XX Mendeleev Congress on General and Applied Chemistry. Ekaterinburg: Ural Branch of the Russian Academy of Sciences, 2016, pp. 25–26.
4. Kablov E.N. Materials of the new generation – the basis of innovation, technological leadership and national security of Russia. Intellekt i tekhnologii, 2016, no. 2 (14), pp. 16–21.
5. Zheleznyak V.G. Modern paint and varnish materials for use in aviation equipment products. Trudy VIAM, 2019, no. 5 (77), paper no. 07. Available at: http://www.viam-works.ru (accessed: October 17, 2022). DOI: 10.18577/2307-6046-2019-0-5-62-67.
6. Kuznetsova V.A., Zheleznyak V.G., Baranova N.V., Lebedeva N.N.Influence of hardener ОС-17 on exploiting properties of the varnish covering УР-231. Trudy VIAM, 2018, no. 6 (66), paper no. 08. Available at: http://www.viam-works.ru (accessed: June 27, 2022). DOI: 10.18577/2307-6046-2018-0-6-68-76.
7. Buhler K.-W. Heat- and heat-resistant polymers. Ed. Ya.S. Vygodsky. Moscow: Khimiya, 1984, 1056 p.
8. Kuznetsova V.A., Marchenko S.A., Emelyanov V.V., Zheleznyak V.G. Study of the influence of molecular mass of epoxy oligomers and hardeners on the operational properties of paint coatings. Aviation materials and technology, 2021. no. 1 (62), paper no. 07. Available at: http://www.journal.viam.ru (accessed: November 17, 2022). DOI: 10.18577/2713-0193-2021-0-1-71-79.
9. Protasov V.N. Forecasting the Duration of Preservation of the Strength of Polymer Coatings in Operating Environments. Lakokrasochnye materialy i ikh primenenie, 1989, no. 2, pp. 77–80.
10. Popov A.A., Rapoport N.Ya., Zaikov G.E. Oxidation of oriented and stressed polymers. Moscow: Khimiya, 1987, 232 p.
11. Grassi N., Scott J. Destruction and stabilization of polymers. Moscow: Mir, 1988, 446 p.
12. Gorbunov B.N., Gurvich Ya.A., Maslova I.P. Chemistry and technology of stabilizers of polymeric materials. Moscow: Khimiya, 1981, 368 p.
13. Manuel N.M., Buchachenko A.L. Physical chemistry of aging and stabilization of polymers. Moscow: Nauka, 1982, 360 p.
14. Kablov E.N. Innovative developments of FSUE «VIAM» SSC of RF on realization of «Strategic directions of the development of materials and technologies of their processing for the period until 2030». Aviacionnye materialy i tehnologii, 2015, no. 1 (34), pp. 3–33. DOI: 10.18577/2071-9140-2015-0-1-3-33.
15. Kaush G. Destruction of polymers. Moscow: Mir, 1981, 440 p.
16. Milinchuk V.K., Klinshpont E.G., Pshetskiy S.Ya. Macroradicals. Moscow: Khimiya, 1980, 263 p.
17. Kuznetsova V.A., Yemelyanov V.V., Shapovalov G.G., Kovrizhkina N.A. Use of modifiers for increase of operational properties of paint coatings on the basis of the epoxy film-forming (review). Trudy VIAM, 2021, no. 12 (106), paper no. 08. Available at: http://www.viam-works.ru (accessed: June 27, 2022). DOI: 10.18577/2307-6046-2021-0-12-63-72.
18. Kuznetsova V.A., Silaeva A.A., Zheleznyak V.G., Marchenko S.A. Modification of epoxy film-forming and the hardeners for coatings (review). Trudy VIAM, 2022, no. 5 (111), paper no. 09. Available at: http://www.viam-works.ru (accessed: June 27, 2022). DOI: 10.18577/2307-6046-2022-0-5-96-111.
19. Moshinsky L.Ya. Epoxy resins and hardeners (structure, properties, chemistry and topology of curing). Tel Aviv: Arcadia Press Ltd, 1995, 370 p.
20. Mostovoy A.S., Panova L.G. Investigation of the possibility of using low molecular weight polyamide grade PO-300 as a "cold" curing hardener for epoxy oligomers. Plasticheskiye massy, 2016, no. 1–2, pp. 16–18.

Pages:: 156-166

Keywords: fractography, fracture toughness tests, finite-element model, brittle fracture, heat-resistant steel

Reference List

1. Bose Filho W.W., Carvalho A.L.M., Bowen P. Micromechanisms of cleavage fracture initiation from inclusions in ferritic welds. Part I. Quantification of local fracture behavior observed in notched test pieces. Material Science Engineering A, 2007, vol. 460–461, pp. 436–452.
2. Bordet S.R., Karstensen A.D., Knowles D.M., Wiesner C.S. A new statistical local criterion for cleavage fracture in steel. Part I: Model presentation. Engineering Fracture Mechanics, 2005, vol. 72, no. 3, pp. 435–452.
3. Beremin F.M., Pineau A., Mudry F. et al. A local criterion for cleavage fracture of a nuclear pressure vessel steel. Metallic Transition A, 1983, vol. 14, no. 11, pp. 2277–2287.
4. Kablov E.N. Materials of a new generation and digital technologies for their processing. Vestnik Rossiyskoy akademii nauk, 2020, vol. 90, no. 4, pp. 331–334.
5. Kablov E.N. VIAM: new generation materials for PD-14. Krylya Rodiny, 2019, no. 7–8, pp. 54–58.
6. Kablov E.N. The role of fundamental research in the creation of new generation materials. Report of XXI Mendeleev Congress on General and Applied Chemistry: in 6 vols. St. Petersburg, 2019, vol. 4 pp. 24.
7. State Standard 1497–84. Metals. Tensile test methods. Moscow: Standartinform, 2008, 26 p.
8. State Standard 25.506–85. Calculations and strength tests. Methods of mechanical testing of metals. Determination of crack resistance characteristics (fracture toughness) under static loading. Moscow: Standartinform, 1985, 38 p.
9. Krasowsky A.J. Fracture mechanics of metals: Some features of crack initiation and crack propagation. Physical Aspects of Fracture, 2001, vol. 32, no. 32, pp. 147–166.
10. Grigorenko V.B., Morozovа L.V. The usage of fractographic analysis to diagnostic the causes of destruction of products from medium-carbon steel. Trudy VIAM, 2018, no. 8 (68), paper no. 10. Available at: http://www.viam-works.ru (accessed: June 30, 2022). DOI: 10.18577/2307-6046-2018-0-8-98-111.
11. Yakovlev N.O., Sedov O.V., Gulina I.V., Grinevich A.V. Fractographic study of bearing steel fracture. Trudy VIAM, 2020, no. 2 (86), paper no. 10. Available at: http://www.viam-works.ru (accessed: June 30, 2022). DOI: 10.18577/2307-6046-2020-0-2-91-100.
12. Oreshko E.I., Erasov V.S., Grinevich D.V., Sershak P.V. Review of criteria of durability of materials. Trudy VIAM, 2019, no. 9 (81), paper no. 12. Available at: http://www.viam-works.ru (accessed: June 30, 2022). DOI: 10.18577/2307-6046-2019-0-9-108-126.
13. Nikolaev E.V., Slavin A.V., Startsev V.O., Laptev A.B.Modern approaches to assessing the impact of external factors on materials and complex technical systems (to the 120th anniversary of G.V. Akimov). Trudy VIAM, 2021, no. 9 (103), paper no. 12. Available at: http://www.viam-works.ru (accessed: June 30, 2022). DOI: 10.18577/2307-6046-2021-0-9-117-130.
14. Zenkevich O.S. Finite element method in engineering. Moscow: Mir, 1975. 539 p.
15. Kiselev A.S., Kiselev A.S., Kiselev I.A., Krutko E.S. Improving the efficiency of numerical algorithms implemented in the PC UZOR-1. Methods and software for strength calculations. Moscow: NIKIET, 2009, pp. 72–83.
16. Malinin N.N. Applied theory of plasticity and creep. Moscow: Mashinostroenie, 1975, 399 p.
17. Morozov E.M., Nikishkov G.P. Finite element method in fracture mechanics. Moscow: URSS, 2017, 256 p.
18. ASTM E 1921-11a. Standard Test Method for Determination of Reference Temperature, T₀, for Ferritic Steels in the Transition Range. Toronto: ASTM International, 2011, 39 p. DOI: 10.1520/E1921-21A.
19. Erak A.D. Correlation between crack resistance parameters of reactor vessel steels VVER-1000 with structural parameters of fracture surfaces of specimens of the SE(B) type: thesis, Cand. Sc. (Tech.). Moscow, 2014, 134 p.