ARCHIVE

Aviation materials and technologies №1, 2013

Contents

  • S.V. Ovsepyan, E.A. Lukina, E.V. Filonova, I.S. Mazalov

    Formation of the Strengthening Phase during the High-Temperature Nitriding of Ni-Co-Cr Weldable Wrought Superalloy

    3-8
  • A.I. Kovtunov, S.V. Myamin

    Study of the Technological and Mechanical Properties of Laminated Titano-Aluminium Composite Materials, Produced by Liquid-Phase Method

    9-12
  • D.A. Ponomarenko, N.V. Moiseev, A.V. Skugorev

    Production of GTE Superalloy Disks with the Use of Isothermal Presses

    13-16
  • S.A. Muboyadjan, S.A. Budinovsky, A.M. Gayamov, P.V. Matveev

    High-Temperature Heat-Resistant Coatings and Heat-Resistant Layers for Thermoprotective Coatings

    17-20
  • V.P. Zhilikov, V.S. Rylnikov

    Study of Alloying Effect on the Corrosion Resistance of Zn–7Al–3,7Cu Zinc Solder

    21-23
  • Yu.A. Khokhlov, A.G. Krynin, V.A. Bogatov, P.P. Kislyakov

    Optical Constants of Thin Indium Oxide Films, Alloyed by Tin and Deposited onto Polyethylene Terephthalate Film by the Reactive Magnetron Sputtering Method (Spectrum Infrared Short-Range Region)

    24-28
  • V.M. Buznik

    Superhydrophobic Materials Based on Fluoroplastics

    29-34
  • K.I. Donetsky, A.V. Khrulkov, D.I. Kogan, P.G. Belinis, Yu.V. Lukyanenko

    Use of Three-Dimensional Reinforcing Preforms during the Production of Polymer Composite Products

    35-39
  • L.V. Chursova, M.A. Kim, N.N. Panina, E.P. Shvetsov

    Nanomodified Epoxy Binder for the Construction Industry

    40-47
  • E.K. Kondrashov, A.A. Kozlova, N.E. Malova

    Study of the Curing Kinetics of Fluoropolyurethane Enamels by the Use of Aliphatic Polyisocyanates of Various Types

    48-49
  • N.I. Nefyodov, L.V. Semyonova

    Development Tendencies in the Field of Conformal Coatings for the Moisture Protection and Electrical Insulation of Printed-Circuit Boards and Electronics Elements

    50-52
  • A.A. Belyaev, E.E. Bespalova, A.M. Romanov

    Fire-Safety Radio-Absorbing Materials for Echo-Free Chambers

    53-55
  • S.L. Barbotko, E.N. Shurkova, O.S. Volny, N.S. Skrylyov

    Evaluation of Polymer Composite Fire-Safety for the Outer Contour of Aeronautical Engineering

    56-59
  • L.S. Yanovskiy, V.M. Ezhov, A.A. Molokanov, K.V. Sharanina, A.V. Kirsanov

    Lubricating oils for aircraft turboshaft engines and helicopters gearboxs

    60-63
  • M.A. Dalin, A.S. Generalov, A.S. Boychuk, D.S. Lozhkova

    Basic development tendencies of acoustic non-destructive control methods

    64-69
  • D.E. Baranov, M.V. Gagarin, A.G. Yakovlev, I.N. Yaroshenko

    Some Aspects of Military and Technical Cooperation with the Chinese People Republic

    69-70
Содержание номера
1.

DOI:

UDC: 669.018.44:669.245

Pages:: 3-8

S.V. Ovsepyan1, E.A. Lukina1, E.V. Filonova1, I.S. Mazalov1

[1] Federal state unitary enterprise «All-Russian Scientific-Research Institute of Aviation Materials» of National Research Center «Kurchatov Institute»

Formation of the Strengthening Phase during the High-Temperature Nitriding of Ni-Co-Cr Weldable Wrought Superalloy

The regularities of the strengthening phase formation were studied during the chemico-thermal treatment (high-temperature nitriding) in VG171 (Ni-Co-Cr) weldable wrought superalloy. The alloy microstructure description is presented. It was stated, that the nitride morphology and chemical composition were changed depending on the nitriding process duration and the distance from the specimen surface. The possible mechanisms of forming fragmentary nitride particles were also considered in the paper.

Keywords: nitriding, nitrides, structure, Ni-base superalloy, electron microscopy, phase, chemical composition

Reference List

    1. Kablov E.N. Strategicheskie napravlenija razvitija materialov i tehnologij ih pererabotki na period do 2030 [The strategic directions of development of materials and technologies of their processing for the period to 2030] //Aviacionnye materialy i tehnologii. 2012. №S. S. 7‒17.

    2. Lomberg B.S., Ovsepjan S.V., Bakradze M.M., Mazalov I.S. Vysokotemperaturnye zharo-prochnye nikelevye splavy dlja detalej gazoturbinnyh dvigatelej [High-temperature heat resisting nickel alloys for details of gas-turbine engines] //Aviacionnye materialy i tehnologii. 2012. №S. 52‒57.

    3. Lomberg B.S., Ovsepjan S.V., Bakradze M.M., Mazalov I.S. Vysokozharoprochnye deformiruemye nikelevye splavy dlja perspektivnyh gazoturbinnyh dvigatelej i gazoturbinnyh ustanovok [High-heat resisting deformable nickel alloys for perspective gas-turbine engines and gas-turbine installations] //Vestnik MGTU im. N.Je. Baumana. 2011. №SP2. S. 98‒103.

    4. Bykov Ju.G., Ovsepjan S.V., Mazalov I.S., Romashov A.S. Primenenie novogo zharoprochnogo splava VZh171 v konstrukcii perspektivnogo dvigatelja [Application of a new heat resisting alloy of VZh171 in a design of the perspective engine] //Vestnik dvigatelestroenija. 2012. №2 (27). S. 246−250.

    5. Petrova L.G. Sovremennye tendencii razvitija teorii i praktiki processov azotirovanija stalej [Current trends of development of the theory and practice of processes of nitriding steels] //Metallurgija mashinostroenija. 2011. №4. S. 40.

    6. Petrova L.G., Chudina O.V. Primenenie metodologii upravlenija strukturoobrazovaniem dlja razrabotki uprochnjajushhih tehnologij [Application of methodology of management by structurization for development of strengthening technologies] //MiTOM. 2010. №5. S. 31‒41.

    7. Kodentsov A.A., Gulpen J.H., Cserhati C., Kivilahti J.K., Van Loo F.J.J. High-temperature nitridation of Ni‒Cr alloys» //Met. And Mater. Trans. A. 1996. V. 27. №1. P. 59‒69.

    8. Barnes J.J., Lai G.Y. Factors affecting the nitridation behavior of Fe-base, Ni-base and Co-base alloys in pure nitrogen //Journal de physique IV Colloque C9. 1993. V. 3. №12. P. 176.

    9. Petrova L.G. Physicochemical characteristics of the internal nitriding of multicomponent alloys //Metal Science and Heat Treatment. 1995. V. 37. №1‒2. P. 41‒47.

     

Полнотекстовая версия
">Full version
2.

DOI:

UDC: 669.018.95

Pages:: 9-12

A.I. Kovtunov1, S.V. Myamin1

[1] Togliatti State University 14, Belorusskaya St., Togliatti, 445667, Russia Telephone: +7 (8482) 54-63-99, +7 (8482) 53-93-32, office@tltsu.ru

Study of the Technological and Mechanical Properties of Laminated Titano-Aluminium Composite Materials, Produced by Liquid-Phase Method

The novel liquid-phase method was proposed for forming the laminated Ti-Al composite materials. The effect of liquid-phase temperature conditions on the wetting intensity and rate of titanium packet by the aluminium melt was studied along with the chemical and phase composition of the composite layers. The relationship of the titanium and aluminium bonding strength from the temperature conditions and parameters of multilayer titanium packet assembling was established. The growth kinetics of Ti-Al transition intermetallic phases was also studied.

Keywords: laminated composite material, forming liquid-phase process, aluminium, titanium, wetting, intermetallide, activating flux

Reference List

    1. Trykov Ju.P., Gurevich L.M., Shmorgun V.G. Sloistye kompozity na osnove aljuminija i ego splavov [Layered composites on the basis of aluminum and its alloys]. M.: Metallurgizdat. 2004. 230 s.

    2. Kovtunov A.I., Mjamin S.V., Chermashenceva T.V. Issledovanie processov smachivanija stali aljuminiem pri proizvodstve sloistyh kompozitov [Research of processes of wetting became aluminum by production of layered composites] //Svarochnoe proizvodstvo. 2011. №3. S. 8‒11.

    3. Grjotheim K., Krohn C., Malinovsky M., Matiasovsky K., Thonstad J. Aluminium electrolysis Fundamentals of the Hall-Heroult process. 2nd edition //Aluminium-Verlag. 1982. 443 p.

    4. Spravochnik po pajke [The reference book on the soldering] /Pod red. I.E. Petrunina. M.: Mashinostroenie. 2003. 480 s.

    5. Gurevich S.M., Zamkov V.N., Blashhuk V.E. i dr. Metallurgija i tehnologija svarki titana i ego splavov [Metallurgy and technology of welding of the titan and his alloys]. K.: Naukova dumka. 1986. 240 s.

     

Полнотекстовая версия
">Full version
3.

DOI:

UDC: 621.438:669.018.44

Pages:: 13-16

D.A. Ponomarenko1, N.V. Moiseev2, A.V. Skugorev2

[1] FEDERAL STATE UNITARY ENTERPRISE "ALL-RUSSIAN SCIENTIFIC RESEARCH INSTITUTE OF AVIATION MATERIALS", admin@viam.ru
[2] Federal state unitary enterprise «All-Russian Scientific-Research Institute of Aviation Materials» of National Research Center «Kurchatov Institute»

Production of GTE Superalloy Disks with the Use of Isothermal Presses

The principles, concerning the deformation treatment of the up-to-date superalloys by the hot isothermal forging in air are given in the paper. The advantages of the isothermal forging application were determined for the production of turbine disks of small-size GTE and units. Two production variants of disk die forgings made of pressed bars and high-gradient directionally-solidified ingots were considered.

Keywords: superalloys, isothermal forging, turbine disk, small-size GTE and units

Reference List

    1. Ospennikova O.G. Strategija razvitija zharoprochnyh splavov i stalej special'nogo naznachenija, zashhitnyh i teplozashhitnyh pokrytij [Strategy of development of heat resisting alloys and steels special purpose, protective and heat-shielding coverings] //Aviacionnye materialy i tehnologii. 2012. №S. S. 19‒35.

    2. Kablov E.N., Ospennikova O.G., Lomberg B.S. Kompleksnaja innovacionnaja tehnologija izotermicheskoj shtampovki na vozduhe v rezhime sverhplastichnosti diskov iz superzharoprochnyh splavov [Complex innovative technology of isothermal stamping on air in a mode of superplasticity of disks from superheat resisting alloys] //Aviacionnye materialy i tehnologii. 2012. №S. S. 129‒140.

    3. Figlin S.Z., Bojcov V.V., Kalpin Ju.G., Kaplin Ju.I. Izotermicheskoe deformirovanie metallov [Isothermal deformation of metals]. M.: Mashinostroenie. 1978. 239 s.

    4. Gerasimov D.E., Razuvaev E.I. Proizvodstvo deformirovannyh polufabrikatov iz sovremennyh i perspektivnyh zharoprochnyh nikelevyh splavov [Production of the deformed semi-finished products from modern and perspective heat resisting nickel alloys] /V sb.: Aviacionnye materialy i tehnologii. Vyp. «Tehnologija proizvodstva aviacionnyh metallicheskih materialov». M.: VIAM. 2002. S. 125‒132.

Полнотекстовая версия
">Full version
4.

DOI:

UDC: 629.7.023.224

Pages:: 17-20

S.A. Muboyadjan1, S.A. Budinovsky2, A.M. Gayamov3, P.V. Matveev4

[1] FEDERAL STATE UNITARY ENTERPRISE "ALL-RUSSIAN SCIENTIFIC RESEARCH INSTITUTE OF AVIATION MATERIALS", admin@viam.ru
[2] Federal State Unitary Enterprise «All-Russian Scientific Research Institute of Aviation Materials»
[3] Federal state unitary enterprise «All-Russian Scientific-Research Institute of Aviation Materials» of National Research Center «Kurchatov Institute», admin@viam.ru
[4] ALL-RUSSIAN SCIENTIFIC RESEARCH INSTITUTE OF AVIATION MATERIALS, admin@viam.ru

High-Temperature Heat-Resistant Coatings and Heat-Resistant Layers for Thermoprotective Coatings

The high-temperature heat-resistant coatings were considered for the protection of carbon-free Ni-base superalloys, modified by rhenium and ruthenium, at the operating temperature to 1150 ° C along with the heat-resistant metallic layers of thermoprotective coating. The study results of the effect of complex heat-resistant coating with the metal-ceramic barrier layer upon the heat resistance, structural stability and stress rupture of carbon-free Ni-base superalloy, modified by rhenium and ruthenium (VGM1, VGM4) are given in the present paper. The selection of heat-resistant metallic layer of the thermoprotective coating, in particular, VGMS-2 (Ni-5Cr-12Al-1Hf)+Al was performed on the base of heat-resistance test (1100°C, 1000 h) results of GS 36 specimens.

Keywords: heat-resistant coatings, metal-ceramic layers, secondary reaction zone

Reference List

    1. Walston W.S., Schaefer J.C., Murphy W.H. A new type of microstructural instability in superalloys – SRZ /In: Superalloys–1996. Warrendale, PA //TMS. 1996. P. 9–18.

    2. Budinovskij S.A., Mubojadzhjan S.A., Gajamov A.M., Kos'min A.A. Zharostojkie ionno-plazmennye pokrytija dlja lopatok turbin iz nikelevyh splavov, legirovannyh reniem [Heat-resistant ion-plasma coverings for shovels of turbines from the nickel alloys alloyed by rhenium] //MiTOM. 2008. №6. S. 31–36.

    3. Mubojadzhjan S.A., Budinovskij S.A., Gajamov A.M., Smirnov A.A. Poluchenie keramicheskih teplozashhitnyh pokrytij dlja rabochih lopatok turbin aviacionnyh GTD magnetronnym metodom [Receiving ceramic heat-shielding coverings for working shovels of turbines of aviation GTE a magnetron method] //Aviacionnye materialy i tehnologii. 2012. №4. S. 3−8.

    4. Kablov E.N., Mubojadzhjan S.A. Zharostojkie i teplozashhitnye pokrytija dlja lopatok turbiny vysokogo davlenija perspektivnyh GTD [Heat-resistant and heat-shielding coverings for shovels of the turbine of a high pressure of perspective GTE] //Aviacionnye materialy i tehnologii. 2012. №S. S. 60−70.

    5. Budinovskij S.A., Mubojadzhjan S.A., Gajamov A.M., Stepanova S.V. Ionno-plazmennye zharostojkie pokrytija s kompozicionnym bar'ernym sloem dlja zashhity ot okislenija splava ZhS36-VI [Ion-plasma heat-resistant coverings with a composite barrier layer for protection against oxidation of an alloy of ZhS36-VI] //MiTOM. 2011. №1. S. 34–40.

    6. Goward G.W. Progress in coatings for gas turbine airfoils //Surface and Coatings Technology. 1998. P. 73–79, 108–109.

    7. Shafrik R., Sprague R. Superalloy technology – a perspective on critical innovations for turbine engines //Key Engineering Materials. 2008. V. 380. P. 113–134.

    8. Hazel B., Rigney J., Gorman M., Boutwell B., Darolia R. Development of improved bond coat for enhanced turbine durability //Superalloys. 2008. P. 753–760.

    9. Haynes J.A., Pint B.A., Porter W.D., Wright I.G. Comparison of Thermal Expansion and Oxidation Behavior of Various High-Temperature Coating Materials and Superalloys //Materials at High Temperature. 2003. P. 87–94.

     

Полнотекстовая версия
">Full version
5.

DOI:

UDC: 621.791.35

Pages:: 21-23

V.P. Zhilikov1, V.S. Rylnikov1

[1] FEDERAL STATE UNITARY ENTERPRISE "ALL-RUSSIAN SCIENTIFIC RESEARCH INSTITUTE OF AVIATION MATERIALS"

Study of Alloying Effect on the Corrosion Resistance of Zn–7Al–3,7Cu Zinc Solder

The effect of small additions of alloying elements on the corrosion resistance of Zn‒7Al‒3,7Cu zinc solders was studied in the salt spray chamber and 3% NaCl solution. The most effect of the corrosion resistance increase is achieved during the multicomponent alloying by magnesium, cadmium, chromium and nickel.

Keywords: corrosion resistance of zinc solders, multicomponent alloying

Reference List

    1. Lashko N.F., Lashko S.V. Pajka metallov [Soldering of metals]. M.: Mashinostroenie. 1977. 327 s.

    2. Panchenko Ju.M., Strekalov P.V., Chesnokov D.V., Zhirnov A.D., Zhilikov V.P., Ka-rimova S.A., Tararaeva T.I. Zavisimost' korrozionnoj stojkosti splava D16 ot zasolen-nosti i meteoparametrov primorskoj atmosfery [Relation of corrosion resistance of an alloy of D16 from salinity and meteoparameters of the seaside atmosphere] //Aviacionnye materialy i tehnologii. 2010. №3. S. 8–14.

    3. Zhirnov A.D., Strekalova P.V., Karimova S.A., Zhilikov V.P., Tararaeva T.I., Mishhen-kov E.N. Sezonnaja dinamika processa korrozii metallov na beregovoj zone Chernogo morja [Seasonal dynamics of process of corrosion of metals on a coastal zone of the Black Sea] //Korrozija: materialy, zashhita. 2007. №8. S. 23–29.

    4. Tomashov N.D. Teorija korrozii i zashhity metallov [Theory of corrosion and protection of metals]. M.: Akademizdat. 1960. 590 s.

    5. Zhuk N.P. Teorija i zashhita metallov [Theory and protection of metals]. M.: Metallurgi-ja. 1976. 472 s.

    6. Vysokotemperaturnyj pripoj dlja aljuminija [High-temperature solder for aluminum]: pat. 56-4359 Japonii. Izobretenija v SSSR i za rubezhom. 1981. №7.

    7. Zhilikov V.P., Lisickij B.S., Kanaev N.A., Sokolova A.A., Najmushina V.V., Kuzmicheva R.A. Poljarograficheskoe opredelenie korrozii pajanyh soedinenij medi [Polarographic definition of corrosion of solder compounds of copper] //Zashhita metal-lov. 1985. T. 21. №1. 121 s.

Полнотекстовая версия
">Full version
6.

DOI:

UDC: 629.7.023.222

Pages:: 24-28

Yu.A. Khokhlov1, A.G. Krynin2, V.A. Bogatov3, P.P. Kislyakov4

[1] Federal state unitary enterprise «All-Russian Scientific-Research Institute of Aviation Materials» of National Research Center «Kurchatov Institute», admin@viam.ru
[2] Technoinfo ltd
[3] Federal State Unitary Enterprise «All-Russian Scientific Research Institute of Aviation Materials»
[4] FEDERAL STATE UNITARY ENTERPRISE "ALL-RUSSIAN SCIENTIFIC RESEARCH INSTITUTE OF AVIATION MATERIALS", admin@viam.ru

Optical Constants of Thin Indium Oxide Films, Alloyed by Tin and Deposited onto Polyethylene Terephthalate Film by the Reactive Magnetron Sputtering Method (Spectrum Infrared Short-Range Region)

The optical properties of polyethylene terephthalate film with the coating of indium oxide, alloyed by tin (ITO) and deposited by the reactive magnetron sputtering method were investigated. The optical ITO coating constants were determined with the various electrical conductivity in the infrared spectrum region (λ=1,5-20 μm).

Keywords: ITO, optical constants, magnetron sputtering, transparent electrode

Reference List

    1. Martin P.J., Netterfield R.P., McKenzie D.R. Properties of indium tin oxide films prepared by ion-assisted deposition Original Research Article //Thin Solid Films. 1986. V. 137. №2.           P. 207‒214.

    2. Dobrowolski J.A., Ho F.C., Menagh D., Simpson R., Waldorf A. Transparent conducting indium tin oxide films formed on low or medium temperature substrates by ion-assisted deposition //Applied Optics. 1987. V. 26. №24. P. 5204‒5210.

    3. Bogatov V.A., Kondrashov S.V., Hohlov Ju.A. Mnogofunkcional'nye opticheskie pokrytija i materialy [Multipurpose optical coverings and materials] //Aviacionnye materialy i tehnologii. 2012. №S. S. 343–348.

    4. Yeon Sik Jung. Spectroscopic ellipsometry studies on the optical constants of indium tin oxide films deposited under various sputtering conditions //Thin Solid Films. 2004. V. 467. P. 36–42. 

    5. Synowickiu R.A. Spectroscopic ellipsometry characterization of indium tin oxide film microstructure and optical constants //Thin Solid Films. 1998. V. 313‒314. P. 394‒397.

    6. Bogatov V.A., Kondrashov S.V., Hohlov Ju.A. Poluchenie gradientnogo pokrytija oksinitrida aljuminija metodom reaktivnogo magnetronnogo raspylenija [Preparation of gradient coating aluminum oxynitride by reactive magnetron sputtering] //Aviacionnye materialy i tehnologii. 2010. №3. S. 19‒21.

    7. Bogatov V.A., Zaharov S.S., Kisljakov P.P., Krynin A.G., Hohlov Ju.A. Vlijanie rezhimov magnetronnogo napylenija na optiko-fizicheskie svojstva mednyh nanopokrytij [Influence of modes of a magnetron dusting on optical-physical properties of copper nanocoverings] //Nanomaterialy i nanotehnologii. 2011. №4. S. 45‒53.

    8. Hohlov Ju.A., Bogatov V.A., Berezin N.M. Stabilizacija reaktivnogo magnetronnogo osazhdenija magnitnym polem [Stabilization of jet magnetron sedimentation by a magnetic field] //Fizika i himija obrabotki materialov. 2012. №5. S. 46‒50.

    9. Bogatov V.A., Hohlov Ju.A., Sytyj Ju.V., Zhadova N.S. Vlijanie obrabotki v razrjade s zamknutym drejfom jelektronov na adgezionnye svojstva i prochnost' kleevyh soedinenij polimerov [Processing influence in the category with the closed drift of electrons on adhesive properties and durability of glue compounds of polymers] //Klei. Germetiki. Tehnologii. 2011. №9. S. 27‒31.

     

Полнотекстовая версия
">Full version
7.

DOI:

UDC: 678.8

Pages:: 29-34

V.M. Buznik1

[1] Institute of Metallurgy and Material Science, RAS, imet@imet.ac.ru

Superhydrophobic Materials Based on Fluoroplastics

The principal potentialities and definite technological methods, being used for producing the superhydrophobic products and coatings based on fluoroplastics are discussed in the present paper. The application perspectives of fluoroplastics superhydrophobic materials are analyzed in the various fields of industry, including the aeronautical engineering

Keywords: fluoroplastics materials, polytetrafluoroethylene, coating production methods, supercriti-cal carbon dioxide, superhydrophobics

Reference List

    1. Bojnovich L.B., Emel'janenko A.M. Gidrofobnye materialy i pokrytija: principy sozdanija, svojstva i primenenija [Hydrophobic materials and coverings: principles of creation, property and application] //Uspehi himii. 2008. T. 77. №7. S. 619–638.

    2. Bejder Je.Ja., Donskoj A.A., Zhelezina G.F., Kondrashov Je.K., Sytyj Ju.V., Surnin E.G. Opyt primenenija aviacionnyh materialov v aviacionnoj tehnike [Experience of application of aviation materials in the aircraft equipment] //Rossijskij himicheskij zhurnal. 2008. T. LII. №3. S. 30–44.

    3. Panshin Ju.A., Malkevich S.G., Dunaevskaja C.S. Ftoroplasty [Fluoroplastics]. M.: Himija. 1978. 230 s. 

    4. Grinthal A., Kang S.H., Epstein A.K., Aizenberg M., Khan M., Aizenberg J. //Nano Today. 2011. №7. P. 35‒52.

    5. Grakovich P.N., Ivanov L.F., Kalinin L.A., Rjabchenko I.L., Tolstopjatov E.M., Krasovskij A.M. Lazernaja abljacija politetraftorjetilena [Laser ablyation of polytetrafluoroethylene] //Rossijskij himicheskij zhurnal.  2008. T LII. №3. S. 97–105.

    6. Kozlov V.A., Filatov Ju.N., Naumova Ju.A. Issledovanie processa jelektroformovanija smesej ftorpolimerov i svojstv poluchaemyh materialov [Research of process of electroformation of mixes of fluoropolymers and properties of received materials] //Vestnik MITHT. 2011. T. 6. №1. S. 22‒25.

    7. Nikitin L.N., Galljamov M.O., Said-Galiev Je.E., Hohlov A.R., Buznik V.M. Sverhkriticheskij dioksid ugleroda kak aktivnaja sreda dlja himicheskih processov s uchastiem ftorpolimerov [Supercritical carbon dioxide as the active environment for chemical processes with participation of fluoropolymers] //Rossijskij himicheskij zhurnal. 2008. T LII. №3. S. 56–65.

    8. Kirjuhin D.P., Kim I.P., Buznik V.M., Ignat'eva L.N., Kurjavyj V.G., Saharov S.G. Radiacionno-himicheskij sintez telomerov tetraftorjetilena i ih ispol'zovanie dlja sozdanija tonkih zashhitnyh ftorpolimernyh pokrytij [Radiation-chemical synthesis of telomere tetrafluoroethylene and their use for creation of thin protective polymericfluorine coverings] //Rossijskij himicheskij zhurnal. 2008. T. LII. №3. S. 66–71.

    9. Haritonov A.P., Loginov B.A. Prjamoe ftorirovanie polimernyh izdelij – ot fundamental'nyh issledovanij k prakticheskomu ispol'zovaniju [Direct fluoration of polymeric products – from basic researches to practical use] //Rossijskij himicheskij zhurnal. 2008. T. LII. №3. S. 106–111.

     

Полнотекстовая версия
">Full version
8.

DOI:

UDC: 678.8

Pages:: 35-39

K.I. Donetsky1, A.V. Khrulkov1, D.I. Kogan2, P.G. Belinis3, Yu.V. Lukyanenko3

[1] Federal state unitary enterprise «All-Russian Scientific-Research Institute of Aviation Materials» of National Research Center «Kurchatov Institute»
[2] ALL-RUSSIAN SCIENTIFIC RESEARCH INSTITUTE OF AVIATION MATERIALS, admin@viam.ru
[3] Limited Liability Company «Carbontex»

Use of Three-Dimensional Reinforcing Preforms during the Production of Polymer Composite Products

The PCM autoclave-free production technology with the use of three-dimensional reinforcing preforms has been recently mastered by a number of foreign companies and finds an application in the aircraft building. Such PCMs are characterized by the high exfoliation resistance and endurance values, including the high strength near the holes. The use of three-dimensional preforms allows to simplify the problem of joining in the built-up structures and to ensure the possibility of production automatization.

Keywords: composite materials, three-dimensional preforms, autoclave-free moulding methods

Reference List

    1. Grashhenkov D.V., Chursova L.V. Strategija razvitija kompozicionnyh i funkcional'nyh materialov [Strategy of development of composite and functional materials] /V sb.: Aviacionnye materialy i tehnologii: Jubilejnyj nauch.-tehnich. sb. M.: VIAM. 2012. S. 231‒242.

    2. McClain M., Goering J. Overview of Recent Developments in 3D Structures /In.: ICCM 17 «3D Textiles & Composites» Edinburgh. 2009. P. 1−12.

    3. Mohamed M.H., Bogdanovich A.E. Comparetive analysis of different 3D weaving processes, machines and products //In.: ICCM 17 «3D Textiles & Composites» Edinburgh. 2009. 

    4. Tkanaja lenta slozhnoj geometricheskoj konfiguracii dlja obꞌemnyh armirovannyh kompozicionnyh izdelij [Woven tape of a difficult geometrical configuration for the volume reinforced composite products]: pat. 2459894 Ros. Federacija; opubl. 27.08.2012.

    5. Automated 3-D Braiding Machine and Method: pat. 6439096 US 2002. 

    6. Mungalov D., Bogdanovich A. Complex Shape 3-D Braided Composite Preforms: Structural Shapes for Marine and Aerospace //SAMPE Journal. 2004. V. 40. P. 7‒20.

    7. Dushin M.I., Roze A.V., Zhigun I.G. Trehmerno-armirovannye tkanye materialy [The three-dimensional reinforced woven materials] //Mehanika polimerov. 1970.

    8. Kompozitnaja lopatka ventiljatora s mnogoslojnym armirujushhim materialom [Composite shovel of the fan with a multilayered reinforcing material]: pat. 2384749 Ros. Federacija; opubl. 20.03.2010. Bjul. №8.

    9. Muhametov R.R., Ahmadieva K.R., Chursova L.V., Kogan D.I. Novye polimernye svjazujushhie dlja perspektivnyh metodov izgotovlenija konstrukcionnyh voloknistyh PKM [New polymeric binding for perspective methods of production of constructional fibrous PCM] //Aviacionnye materialy i tehnologii. 2011. №2. S. 38‒42.

     

Полнотекстовая версия
">Full version
9.

DOI:

UDC: 678.8:666.7

Pages:: 40-47

L.V. Chursova1, M.A. Kim2, N.N. Panina1, E.P. Shvetsov2

[1] Federal state unitary enterprise «All-Russian Scientific-Research Institute of Aviation Materials» of National Research Center «Kurchatov Institute»
[2] FEDERAL STATE UNITARY ENTERPRISE "ALL-RUSSIAN SCIENTIFIC RESEARCH INSTITUTE OF AVIATION MATERIALS", admin@viam.ru

Nanomodified Epoxy Binder for the Construction Industry

The developed two-component binder consists of the mixture of low-viseous epoxy dianic resin, modified by nanodispersed alumina powder and liquid curing system of catalytic type, containing heterocyclic monomers with active hydroxyl and amine groups. The binder and polymer composite material on its base are characterized by the high strength characteristics and the necessary complex of service properties due to the high technological efficiency of the developed binder, the use of nanodispersed modificators, improved physico-mechanical properties of cured polymer matrix, as well as the applied present-day processing technology.

Keywords: epoxy binder, nanodispersed alumina powder, polymer composite, bearing building structures

Reference List

    1. Internet resources http://www.vozrogdenie-group.ru.

    2. Chursova L.V., Raskutin A.E., Gurevich Ja.M., Panina N.N. Svjazujushhee holodnogo otverzhdenija dlja stroitel'noj industrii [Binder of a cold cure for the construction industry] //Klei. Germetiki. Tehnologii. 2012. №5. S. 40–44.

    3. Muhametov R.R., Ahmadieva K.R., Chursova L.V., Kogan D.I. Novye polimernye svjazujushhie dlja perspektivnyh metodov izgotovlenija konstrukcionnyh voloknistyh PKM [New polymeric binding for perspective methods of production of constructional fibrous PCM] //Aviacionnye materialy i tehnologii. 2011. №2. S. 38–42.

    4. Lesovik V.S., Strokova V.V. O razvitii nauchnogo napravlenija «Nanosistemy v stroitel'nom materialovedenii» [Development of the scientific direction «Nanosystems in Construction Materials Science»] //Stroitel'nye materialy. 2006. №9. S. 18–20.

    5. Akatenkov R.V., Kondrashov S.V., Fokin A.S., Marahovskij P.S. Osobennosti formirovanija polimernyh setok pri otverzhdenii jepoksidnyh oligomerov s funkcializovannymi nanotrubkami [Features of formation of polymer network upon curing of epoxy oligomers with functionalized nanotubes] //Aviacionnye materialy i tehnologii. 2011. №2. S. 31–37.

    6. Polubojarov V.A., Korotaeva Z.A., Belkova T.B., Goncharov A.I., Trofimov A.S., Seljutin G.E. Vlijanie modificirovanija polimerov nanodispersnymi keramicheskimi chasticami na svojstva nanokompozitov [Influence of modifying of polymers by nanodisperse ceramic particles on properties of nanocomposites] //Materialovedenie. 2011. №10. S. 42–47.

    7. Kotov Ju.A. Jelektricheskij vzryv provoloki – metod poluchenija slaboagregirovannyh nanoporoshkov [Electrical explosion of wire – a receiving method the weak aggregate nanopowders] //Rossijskie nanotehnologii. 2009. T. 4. №1–2. S. 40–49.

    8. Storozhenko P.A., Gusejnov Sh.L., Malashin S.I. Nanodispersnye poroshki: metody poluchenija i sposoby prakticheskogo primenenija [Nanodisperse powders: methods of receiving and ways of practical application] //Rossijskie nanotehnologii. 2009. T. 4. №1–2. S. 27−39.

    9. Ivanov V.V. Nanoporoshki nuzhny i vostrebovany sovremennym rynkom [Nanopowders are necessary and demanded by the modern market] //Rossijskie nanotehnologii. 2009. T. 4. №1–2. S. 22–26.

    10. Litvinov V.B., Toksanbaev M.S., Kobec L.P., Deev I.S., Rjabovol D.Ju., Neljub V.A. Kinetika otverzhdenija jepoksidnyh svjazujushhih i mikrostruktura polimernyh matric v ugleplastikah na ih osnove [Kinetics of an cure epoxy binding and a microstructure of polymeric matrixes in coal plastics on their basis] //Materialovedenie. 2011. №7. S. 49–56.

    11. Deev I.S., Kobec L.P. Issledovanie mikrostruktury i osobennostej razrushenija jepoksidnyh polimerov i kompozicionnyh materialov na ih osnove [Research of a microstructure and features of destruction of epoxy polymers and composite materials on their basis] //Materialovedenie. 2010. №5. S. 8–16. №6. S. 13–18.

    12. Deev I.S., Kobec L.P. Torsionnoe razrushenie jepoksidnyh polimerov i matric v polimernyh kompozicionnyh materialah [The torsion destruction of epoxy polymers and matrixes in polymeric composite materials] /V sb. materialov Mezhdunarodnoj konf. «Deformacija i razrushenie materialov i nanomaterialov». 2011. S. 25–28.

Полнотекстовая версия
">Full version
10.

DOI:

UDC: 667.6:620.197

Pages:: 48-49

E.K. Kondrashov1, A.A. Kozlova1, N.E. Malova1

[1] Federal state unitary enterprise «All-Russian Scientific-Research Institute of Aviation Materials» of National Research Center «Kurchatov Institute»

Study of the Curing Kinetics of Fluoropolyurethane Enamels by the Use of Aliphatic Polyisocyanates of Various Types

The effect of hydroxyl-containing copolymer, trifluorochlorethylene and polyisocyanates on the gel-fraction content and coating hardness was studied. The coating properties were determined depending on the polyisocyanate type.

Keywords: painting materials, anticorrosion protection, fluoro-containing polyisocyanates

Reference List

    1. Mjuller B., Pot U. Lakokrasochnye materialy i pokrytija. Principy sostavlenija receptur [Paintwork materials and coverings. Principles of drawing up compoundings]. M.: Pejnt Media. 2007. 237 s.

    2. Kondrashov Je.K., Kuznecova V.A., Semenova L.V., Lebedeva T.A. Osnovnye napravlenija povyshenija jekspluatacionnyh, tehnologicheskih i jekologicheskih harakteristik lakokrasochnyh pokrytij dlja aviacionnoj tehniki [The main directions of increase of operational, technical and ecological characteristics on paint and varnish coverings for the aircraft equipment] //Rossijskij himicheskij zhurnal. 2010. T. LIV. №1. S. 96‒102.

    3. Kondrashov Je.K., Kuznecova V.A., Semenova L.V., Lebedeva T.A., Malova N.E. Razvitie aviacionnyh lakokrasochnyh materialov [Development of aviation paintwork materials] //Vse materialy. Jenciklopedicheskij spravochnik. 2012. №5. S. 49‒54.

    4. Karjakina M.I. Laboratornyj praktikum po ispytaniju lakokrasochnyh materialov i pokrytij [Laboratory workshop on test of paintwork materials and coverings]. M.: Himija. 1989. S. 110‒115.

    5. Semenova L.V., Kondrashov Je.K. Modificirovannyj bromjepoksidnyj lak VL-18 dlja zashhity polimernyh kompozicionnyh materialov [The modified bromo-epoxy varnish of VL-18 for protection of polymeric composite materials] //Aviacionnye materialy i tehnologii. 2010. №1. S. 29‒32.

    6. Semenova L.V., Malova N.E., Kuznecova V.A., Pozhoga A.A. Lakokrasochnye materialy i pokrytija [Paintwork materials and coverings] //Aviacionnye materialy i tehnologii. 2012. №S. S. 315‒327.

Полнотекстовая версия
">Full version
11.

DOI:

UDC: 667.637.2:621.385

Pages:: 50-52

N.I. Nefyodov1, L.V. Semyonova2

[1] ALL-RUSSIAN SCIENTIFIC RESEARCH INSTITUTE OF AVIATION MATERIALS, admin@viam.ru
[2] Limited Liability corporation «Aviation equipment and materials»

Development Tendencies in the Field of Conformal Coatings for the Moisture Protection and Electrical Insulation of Printed-Circuit Boards and Electronics Elements

The development tendencies of protective conformal coatings, functioning as a dielectric insulator and diffusion barrier relative to the moisture are considered in the paper. The analysis of scientific and technical documentation along with the protection documents of leading countries was performed in the field of moisture protection and electrical insulation of electronic units and components.

Keywords: conformal coatings, moisture-protective and electro-insulative varnishes, printed-circuit boards and electronics elements

Reference List

    1. Kochkin V.F., Gurevich A.E. Lakokrasochnye materialy i pokrytija v proizvodstve radioapparatury [Paintwork materials and coverings in production of radio equipment]. L.: Himija. 1991. S. 52‒59.

    2. Chebotarevskij V.V., Kondrashov Je.K. Tehnologija lakokrasochnyh pokrytij v mashinostroenii [Technology of paint and varnish coverings in mechanical engineering]. M.: Mashinostroenie. 1978. 295 s.

    3. Kondrashov Je.K., Kuznecova V.A., Semenova L.V., Lebedeva T.A., Malova N.E. Razvitie aviacionnyh lakokrasochnyh materialov [Development of aviation paintwork materials] //Vse materialy. Jenciklopedicheskij spravochnik. 2012. №5. S. 49‒54.

    4. Semenova L.V., Kondrashov Je.K. Modificirovannyj bromjepoksidnyj lak VL-18 dlja zashhity polimernyh kompozicionnyh materialov [The modified bromo-epoxy varnish of VL-18 for protection of polymeric composite materials] //Aviacionnye materialy i tehnologii. 2010. №1. S. 29‒32.

    5. Semenova L.V., Malova N.E., Kuznecova V.A., Pozhoga A.A. Lakokrasochnye materialy i pokrytija [Paintwork materials and coverings] //Aviacionnye materialy i tehnologii. 2012. №S. S. 315‒327.

    6. Kondrashov Je.K., Kuznecova V.A., Semenova L.V., Lebedeva T.A. Osnovnye napravlenija povyshenija jekspluatacionnyh, tehnologicheskih i jekologicheskih harakteristik lakokrasochnyh pokrytij dlja aviacionnoj tehniki [The main directions of increase of operational, technical and ecological characteristics on paint and varnish coverings for the aircraft equipment] //Rossijskij himicheskij zhurnal. 2010. T. LIV. №1. S. 96‒102.

    7. Aircraft Engineering and Aerospace Technology //International Journal. 2004. V. 76. №5.         P. 523‒526.

    8. Medgyes B.K., Ripka G. Electronics Technology Journal /In.: 30-th International Spring Seminar, 9‒13 May. 2007. Budapest Univ. of technol. & Econ. Budapest, 2007. P. 429‒433.

    9. Yang Wei Discussion for Three Proofing’s Technology Plan of Military Electric Product //Electronics Process Technology. 2009. №3 (www.en.cnki.com.cn).

Полнотекстовая версия
">Full version
12.

DOI:

UDC: 6661.183.6

Pages:: 53-55

A.A. Belyaev1, E.E. Bespalova, A.M. Romanov1

[1] Federal state unitary enterprise «All-Russian Scientific-Research Institute of Aviation Materials» of National Research Center «Kurchatov Institute»

Fire-Safety Radio-Absorbing Materials for Echo-Free Chambers

The fire-safety radio-absorbing materials used for the echo-free chambers based on asbestos are described in the present paper.

Keywords: radio-absorbing material, echo-free chamber

Reference List

    1. Micmaher M.Ju., Torgovanov V.A. Bezjehovye kamery SVCh [Microwave ovens anechoic chambers]. M.: Radio i svjaz'. 1982. 129 s.

    2. Konkin A.A. Uglerodnye i drugie zharostojkie voloknistye materialy [Carbon and other heat-resistant fibrous materials]. M. 1974.

    3. Gunjaev G.M., Kablov E.N., Aleksashin V.M. Modificirovanie konstrukcionnyh ugleplastikov uglerodnymi nanochasticami [Modifying of constructional coal plastics by carbon nanoparticles] //Rossijskij himicheskij zhurnal. 2010. T. LIV. №1. S. 5‒11.

    4. Akatenkov R.V., Anoshkin I.V., Beljaev A.A., Bitt V.V. i dr. Vlijanie strukturnoj organizacii uglerodnyh nanotrubok na radiojekranirujushhie i jelektroprovodjashhie svojstva nanokompozitov [Influence of the structural organization of carbon nanotubes on radio shielding and electroconductive properties of nanocomposites] //Aviacionnye materialy i tehnologii. 2011. №1. S. 35‒37.

    5. Grashhenkov D.V., Shhetanov B.V., Tinjakova E.V., Shheglova T.M. O vozmozhnosti ispol'zovanija kvarcevogo volokna v kachestve svjazujushhego pri poluchenii legkovesnogo teplozashhitnogo materiala na osnove volokon Al2O3 [About possibility of use of quartz fiber as a lightweight heat-shielding material binding at receiving on the basis of Al2O3 fibers] //Aviacionnye materialy i tehnologii. 2011. №4. S. 8‒14

Полнотекстовая версия
">Full version
13.

DOI:

UDC: 678.8:614.841.41

Pages:: 56-59

S.L. Barbotko1, E.N. Shurkova2, O.S. Volny2, N.S. Skrylyov2

[1] Federal state unitary enterprise «All-Russian Scientific-Research Institute of Aviation Materials» of National Research Center «Kurchatov Institute»
[2] FEDERAL STATE UNITARY ENTERPRISE "ALL-RUSSIAN SCIENTIFIC RESEARCH INSTITUTE OF AVIATION MATERIALS", admin@viam.ru

Evaluation of Polymer Composite Fire-Safety for the Outer Contour of Aeronautical Engineering

In this work comparative researches of fire safety of several kinds glass and carbon plastics intended for manufacturing the elements of an aviation external contour are carried out.

Keywords: рolymeric composite materials, methods of fire safety, external contour of planes

Reference List

    1. Barbot'ko S.L. Pozharobezopasnost' aviacionnyh materialov [Fire safety of aviation materials] //Aviacionnye materialy i tehnologii. 2012. №S. S. 431‒439.

    2. Barbot'ko S.L., Shurkova E.N. O pozharnoj bezopasnosti materialov, ispol'zuemyh dlja izgotovlenija vneshnego kontura samoletov [About fire safety of the materials used for production of an external contour of planes] //Pozharovzryvobezopasnost'. 2011. T. 20. №10. S. 19‒24.

    3. Barbot'ko S.L., Kirillov V.N., Shurkova E.N. Ocenka pozharnoj bezopasnosti polimernyh kompozicionnyh materialov aviacionnogo naznachenija [Assessment of fire safety of polymeric composite materials of aviation appointment] //Aviacionnye materialy i tehnologii. 2012. №3. S. 56‒63.

    4. Aviacionnye pravila. Glava 25. Normy letnoj godnosti samoletov transportnoj kategorii [Aviation rules. Chapter 25. Standards of the flight validity of planes of transport category] /V sb.: Mezhgosudarstvennyj aviacionnyj komitet. 3-e izd. s popravkami 1–6. OAO Aviaizdat. 2009. 274 s.

    5. OST 1 90094‒79. Polimernye materialy. Metod opredelenija gorjuchesti dekorativno-otdelochnyh i konstrukcionnyh polimernyh materialov [Polymeric materials. Method of determination of combustibility of ornamental-finishing and constructional polymeric materials].

    6. GOST 24632‒81. Materialy polimernye. Metod opredelenija dymoobrazovanija [Materials polymeric. Method of definition of smoking].

    7. MM 1-595-20-393‒2009. Ocenka progoraemosti materialov bagazhnyh otsekov na malomasshtabnyh obrazcah [Assessment of a fire susceptibility of materials of luggage compartments on small-scale samples].

    8. AITM 3.0005. Determination of Specific Gas Components of Smoke Generated by Non-metallic Aircraft Materials inside the Pressurized Section of Fuselage /In: Airbus Industrie Technical Material.

    9. BSS 7239. Test Method for Toxic Gas Generation by Materials on Combustion /In: Boeing Specification Support Standard.

    10. SMP 800-C. Toxic Gas Generation.

    11. ISO 13344:1996. Determination of the lethal toxic potency of fire effluents.

    12. ASTM E1678-09 Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis.

    13. Opasnye faktory pozhara. Toksichnost' produktov gorenija [Dangerous factors of a fire. Toxicity of products of burning] //http: www.FireEvacuation.ru.

    14. Barbot'ko S.L., Golikov N.I. O kompleksnoj ocenke pozharnoj opasnosti materialov [About a comprehensive assessment of fire hazard materials] //Pozharovzryvobezopasnost'. 2008. T. 17. №6. S. 16‒24.

     

Полнотекстовая версия
">Full version
14.

DOI:

UDC: 621.892.097.3: 621.452.3

Pages:: 60-63

L.S. Yanovskiy1, V.M. Ezhov2, A.A. Molokanov3, K.V. Sharanina4, A.V. Kirsanov5

[1] CIAM, yanovskiy@ciam.ru
[2] CIAM, ezhov@ciam.ru
[3] CIAM, molokanov@ciam.ru
[4] CIAM, sharanina@ciam.ru
[5] CIAM, kirsanov@ciam.ru

Lubricating oils for aircraft turboshaft engines and helicopters gearboxs

The article describes the features of the oils for turboshaft engines. It was found the advantages and disadvantages of modern domestic brands of oils of this class. It was carried comparison of new and promising domestic oil for turboshaft engines, developed by leading companies in the sector, with the existing domestic and foreign counterparts.

Keywords: oils for turboshaft engines, aviation oil, aircraft gas turbine engines

Reference List

    1. Janovskij L.S., Ezhov V.M., Molokanov A.A. Metodologija dopuska aviacionnyh masel k primeneniju na aviatehnike v Rossii i za rubezhom [Methodology of the admission of aviation oils to application on aviation equipment in Russia and abroad] //Dvigatel'. 2012. №2. S. 20‒22.

    2. Kirishev E.L., Popov V.G., Janovskij L.S. Vlijanie kachestva gorjuche-smazochnyh materialov na rabotosposobnost' aviacionnyh gazoturbinnyh dvigatelej [Influence of quality of fuels and lubricants on operability of aviation gas-turbine engines]. M.: MATI. 2008. 102 s.

    3. Janovskij L.S., Dubovkin N.F., Galimov F.M. i dr. Inzhenernye osnovy aviacionnoj himmotologii [Engineering bases of an aviation chemmotology]. Kazan': Izd. Kazansk. un-ta. 2005. 714 s.

    4. Perechen' zarubezhnyh gorjuche-smazochnyh materialov, rekomendovannyh k primeneniju na aviatehnike otechestvennogo proizvodstva [The list of the foreign fuels and lubricants recommended for application on aviation equipment of domestic production] /RTM C2 – 2009. M.: CIAM. 2009. 17 s. 

    5. Hart A.V., Gunderson R.S. Sinteticheskie smazochnye materialy i zhidkosti [Synthetic lubricants and liquids]. L.: Himija. 1965. 385 s.

    6. Dinces A.I., Druzhinina A.V. Sinteticheskie smazochnye masla [Synthetic lubricant oils]. M.: Gostoptehizdat. 1958. 350 s.

    7. Mamed'jarov M.A. Himija sinteticheskih masel [Chemistry of synthetic oils]. L.: Himija. 1989. 236 s.

    8. Hurumova A.F. Vertoletnye masla. Obzornaja informacija [Helicopter oils]. M.: CNIITJeneftehim. 1992. №2. 56 s.

    9. Vipper A.B., Vilenkin A.V., Gajsner D.A. Zarubezhnye masla i prisadki [Foreign oils and additives]. M.: Himija. 1981. 192 s.

     

Полнотекстовая версия
">Full version
15.

DOI:

UDC: 620.179

Pages:: 64-69

M.A. Dalin1, A.S. Generalov1, A.S. Boychuk1, D.S. Lozhkova1

[1] Federal state unitary enterprise «All-Russian Scientific-Research Institute of Aviation Materials» of National Research Center «Kurchatov Institute»

Basic development tendencies of acoustic non-destructive control methods

The research work results in the field of the ultrasonic non-destructive control of GTE turbine dicks die forgings as well as structural elements made of polymer composites are given in the present paper.

Keywords: ultrasonic non-destructive control, ultrasonic phase lattices, sensibility, echo-pulse method, reverberation pass-through method, fault revealing probability

Reference List

    1. Nerazrushajushhij kontrol' [Nondestructive control]: Spravochnik v 7 t. /Pod obshh. red. V.V. Kljueva. T. 3. Ul'trazvukovoj kontrol'. M.: Mashinostroenie. 2004. S. 130, 275.

    2. Introduction to phased array ultrasonic technology applications: R/D Tech guideline. Advanced practical NDT Series. 2004 by R/D Tech Corp.

    3. Non-destructive testing of fiber-reinforced plastics composites. Summerscales John., Elsevier Science Publishers LTD 1990. V. 2. R. 1‒47.

    4. Generalov A.S., Murashov V.V., Dalin M.A., Bojchuk A.S. Diagnostika polimernyh kompozitov ul'trazvukovym reverberacionno-skvoznym metodom [Diagnostics of polymeric composites by an ultrasonic reverberation and through method] //Aviacionnye materialy i tehnologii. 2012. №1. S. 42‒47.

     

Полнотекстовая версия
">Full version
16.

DOI:

UDC: 002.513.5:002.55:002.63

Pages:: 69-70

D.E. Baranov1, M.V. Gagarin1, A.G. Yakovlev1, I.N. Yaroshenko1

[1] FEDERAL STATE UNITARY ENTERPRISE "ALL-RUSSIAN SCIENTIFIC RESEARCH INSTITUTE OF AVIATION MATERIALS", admin@viam.ru

Some Aspects of Military and Technical Cooperation with the Chinese People Republic

Actual features of military and technical cooperation with the People's Republic of China are given in article and the priority directions of its development are presented. As priorities there is a delivery of the aviation equipment, separate knots and accessories of planes, and also creation of the technical centers for their service.

Keywords: military and technical cooperation, arms, military potential, priority, technologies

Reference List

    1. Mal'kevich V.L. Jeksportnyj kontrol': ot protivostojanija k sotrudnichestvu [Export control: from opposition to cooperation] /V sb.: Obshhestvo sohranenija literaturnogo nasledija. M. 2012. 512 s.

    2. Matjash V.N. Geopoliticheskij «treugol'nik» Rossija−SShA−KNR v regione Evrazii (politicheskij analiz): konec XX ‒ nachalo XXI v [Geopolitical "triangle" of Russia−USA−PRC in the region of Eurasia (the political analysis): end of XX ‒ beginning of the XXI century]. M.: Kopi-centr. 2006. 189 s.

    3. Aviacionnye materialy i tehnologii [Aviation materials and technologies]: Nauch.-tehn. sb. Vyp.: Polimernye kompozicionnye materialy. M.: VIAM. 2002. 82 s.

    4. Istorija aviacionnogo materialovedenija: VIAM–75 let poiska, tvorchestva, otkrytij [History of aviation materials science: VIAM-75 of years of search, creativity, opening] /Pod obshh. red. E.N Kablov. M.: Nauka. 2007. 343 s.

    5. Zadohin A.G. Vneshnjaja politika Rossii: nacional'noe soznanie i nacional'nye interesy [Foreign policy of Russia: national consciousness and national interests]. M.: Diplomatich. akademija. 2002. 229 s.

    6. Nauka i zhizn' [Science and life]. 2012. №6.

     

Полнотекстовая версия
">Full version